GFmk2 MCG Pro axis mode button

Moderator: AdminGroup

jonsky7
Posts: 3
Joined: Sat Dec 08, 2018 17:38
Been thanked: 1 time

GFmk2 MCG Pro axis mode button

Postby jonsky7 » Sat Dec 08, 2018 17:47

Hi,

I'm struggling with the configuration software, it has me totally lost :?

Is it possible to turn the axis mode button (press and hold to turn POV hat buttons into axis) into a regular button?

If so I'd be super grateful if it could be explained in the simplest terms.

Oh it would be cool if I could use that button to turn the pinkie paddle from an axes to a button, can you do that?

Thanks

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: GFmk2 MCG Pro axis mode button

Postby Victorus » Sat Dec 08, 2018 22:39

Launch VKGdevcfg.exe. Click line #23 cell on Profile - Buttons - Physical layer tab. Select Button instead of uStick switch. Press Set button. That is all. Briefly.
https://drive.google.com/open?id=1ojzm-lJM4BlPHnGRqSdAdqRsSr2yOsIo User manual.
Try and ask questions. If any))
Be lucky!
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

LukasB
Posts: 11
Joined: Sun Feb 11, 2018 0:45
Has thanked: 4 times
Been thanked: 3 times

Re: GFmk2 MCG Pro axis mode button

Postby LukasB » Sun Dec 09, 2018 11:46

I was just wondering about this, too. Thanks.

jonsky7
Posts: 3
Joined: Sat Dec 08, 2018 17:38
Been thanked: 1 time

Re: GFmk2 MCG Pro axis mode button

Postby jonsky7 » Fri Dec 14, 2018 4:19

Victorus wrote:Launch VKGdevcfg.exe. Click line #23 cell on Profile - Buttons - Physical layer tab. Select Button instead of uStick switch. Press Set button. That is all. Briefly.
https://drive.google.com/open?id=1ojzm-lJM4BlPHnGRqSdAdqRsSr2yOsIo User manual.
Try and ask questions. If any))
Be lucky!


Thanks, got the button to go from mode switch to normal button.

Can't figure out if you can switch an axis, to axis-to-button on the fly using one of the many functions though :?

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: GFmk2 MCG Pro axis mode button

Postby Victorus » Fri Dec 14, 2018 9:57

If you turn on A2B checkbox your axes still work as usually AND virtual buttons will be "pressed" as an axis runs. I use this, for example, to indicate axis position with LEDs. The simpliest LED event is Axis in center. Or its inversion. As buttons are consequently pressed and released, corresponding LEDS flash. Or change light mode (color, brightness, frequency).
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

jonsky7
Posts: 3
Joined: Sat Dec 08, 2018 17:38
Been thanked: 1 time

Re: GFmk2 MCG Pro axis mode button

Postby jonsky7 » Sat Dec 15, 2018 17:28

That's cool, got it figured out in the end, thanks very much :D


Return to “Technical Support”

Who is online

Users browsing this forum: Bing [Bot] and 29 guests