Page 1 of 1
T-Link no longer working
Posted: Thu Oct 04, 2018 6:38
by OitenKay
My Windows 10 got the new update recently version 1809 and this has caused T-Link to suddenly no longer recognize my pedals. The attached screenshot shows the error I receive. I've tried swapping USB ports with not affect. VKBDev's newest version sees the pedals just fine, but I liked T-Link for the quick and easy use of the toe-brakes. Any help would be appreciated.
Re: T-Link no longer working
Posted: Thu Oct 04, 2018 10:45
by AeroGator
OitenKay wrote:My Windows 10 got the new update recently version 1809 and this has caused T-Link to suddenly no longer recognize my pedals
You probably have some special mouse and/or keyboard with their own drivers installed.
It is a known issue, particularly with Logitech and Razor devices; they grab other peripheral devices and don't allow Windows to access them.
You will need to temporary disable these devices prior to using your gaming gear.
Re: T-Link no longer working
Posted: Fri Oct 05, 2018 4:03
by OitenKay
I tried disabling all 3rd party controller software (Logitech and Corsair) to no avail. The program does also give me an abnormal program termination error when closing out of it. Again this only started after windows most recent update.
Re: T-Link no longer working
Posted: Fri Oct 05, 2018 7:09
by ddrake1984
you could try a windows rollback? or recovery?
Re: T-Link no longer working
Posted: Sat Oct 06, 2018 4:11
by OitenKay
So I rolled my Windows 10 back to version 1803 and the problem has gone away. It seems the current version of T-Link has an issue with the latest Windows 10 release 1809.
Re: T-Link no longer working
Posted: Sun Oct 14, 2018 3:22
by jjohnson241
Same problem after updating to Win 10 V1809.
So, VKB, what's the issue? Will there be a fix?
It's not reasonable to expect your customers to roll back their operating system to fix your software.
Please advise.
EDIT: Blackbox Firmware 1.816, DevConfig 87.05, T-Link V 66.2 and 69.5 (tried both, same result). DevConfig Info screen indicates correct firmware, profile and "T-Link Enabled" status.
Note: V87.05 is the only DevConfig version that will run under Win 10 1809. All previous versions abnormally terminate at start of program.
T-Link was working with this firmware, profile and T-Link version prior to update to Win 10 1809.
Re: T-Link no longer working
Posted: Mon Oct 15, 2018 16:54
by Victorus
Re: T-Link no longer working
Posted: Mon Oct 15, 2018 20:11
by jjohnson241
That did it!
Thanks much!