T-Link no longer working

Moderator: AdminGroup

OitenKay
Posts: 3
Joined: Thu Oct 04, 2018 6:32

T-Link no longer working

Postby OitenKay » Thu Oct 04, 2018 6:38

My Windows 10 got the new update recently version 1809 and this has caused T-Link to suddenly no longer recognize my pedals. The attached screenshot shows the error I receive. I've tried swapping USB ports with not affect. VKBDev's newest version sees the pedals just fine, but I liked T-Link for the quick and easy use of the toe-brakes. Any help would be appreciated.

Capture.PNG

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: T-Link no longer working

Postby AeroGator » Thu Oct 04, 2018 10:45

OitenKay wrote:My Windows 10 got the new update recently version 1809 and this has caused T-Link to suddenly no longer recognize my pedals

You probably have some special mouse and/or keyboard with their own drivers installed.
It is a known issue, particularly with Logitech and Razor devices; they grab other peripheral devices and don't allow Windows to access them.
You will need to temporary disable these devices prior to using your gaming gear.
Best Regards,
AeroGator

OitenKay
Posts: 3
Joined: Thu Oct 04, 2018 6:32

Re: T-Link no longer working

Postby OitenKay » Fri Oct 05, 2018 4:03

I tried disabling all 3rd party controller software (Logitech and Corsair) to no avail. The program does also give me an abnormal program termination error when closing out of it. Again this only started after windows most recent update.

User avatar
ddrake1984
Posts: 199
Joined: Wed May 23, 2018 8:36
Has thanked: 84 times
Been thanked: 93 times

Re: T-Link no longer working

Postby ddrake1984 » Fri Oct 05, 2018 7:09

you could try a windows rollback? or recovery?

OitenKay
Posts: 3
Joined: Thu Oct 04, 2018 6:32

Re: T-Link no longer working

Postby OitenKay » Sat Oct 06, 2018 4:11

So I rolled my Windows 10 back to version 1803 and the problem has gone away. It seems the current version of T-Link has an issue with the latest Windows 10 release 1809.

jjohnson241
Posts: 17
Joined: Sun Sep 11, 2016 17:21
Been thanked: 4 times

Re: T-Link no longer working

Postby jjohnson241 » Sun Oct 14, 2018 3:22

Same problem after updating to Win 10 V1809.
So, VKB, what's the issue? Will there be a fix?
It's not reasonable to expect your customers to roll back their operating system to fix your software.
Please advise.

EDIT: Blackbox Firmware 1.816, DevConfig 87.05, T-Link V 66.2 and 69.5 (tried both, same result). DevConfig Info screen indicates correct firmware, profile and "T-Link Enabled" status.
Note: V87.05 is the only DevConfig version that will run under Win 10 1809. All previous versions abnormally terminate at start of program.

T-Link was working with this firmware, profile and T-Link version prior to update to Win 10 1809.

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: T-Link no longer working

Postby Victorus » Mon Oct 15, 2018 16:54

Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

jjohnson241
Posts: 17
Joined: Sun Sep 11, 2016 17:21
Been thanked: 4 times

Re: T-Link no longer working

Postby jjohnson241 » Mon Oct 15, 2018 20:11

That did it!
Thanks much!


Return to “Technical Support”

Who is online

Users browsing this forum: Google [Bot] and 27 guests