Black box still flashing after attaching MCG to Gunfighter

Moderator: AdminGroup

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 19:09

Incorrect microstick configuration.
Capture2.png


Carefully look at the picture.
External.jpg


For the first, the numbers are correctly set, and for the second one there should be 6 and 5.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:12

I have set up using the following settings below. I no longer see AXIS for these mini sticks which is good.

The problem I have now is when I press Master mode up I get button 14 and 30 together, all other directions and centre button are as I want them. The Gate Cont still only registers the centre but none of the directions.

Capture1.PNG
Capture2.PNG
Capture.PNG

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:14

Thanks Ron, I will make further changes.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:17

I made changes as you suggested, but still not as I need for my configuration. I now get two presses again, and also the Gate Cont still does not register a press. Also button 24 stays lit now.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 19:21

Need a screenshot of the Profile-Buttons tab.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:24

Capture3.PNG

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 19:29

Well, how should it work if not assigned? You can go two ways - reset to default and then a switch appears for MasterMode or assign this button in the current profile.

Physical.png

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:33

Capture.PNG

still does not work.

BTW I have no knowledge of how your configuration software works, everything I have done is from reading what other have tried. Lack of clear step by step guides on how to achieve desired profiles really leaves me confused on how to create the profile I want.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 19:46

What do you want to do? Write in more detail and I will try to help and explain step by step.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:49

I want to use this stick primarily for DCS.

I want the Master mode to be buttons not axis. I will use this for targeting slew.
I want the Gate Cont to be buttons, not axis. I will use this for trimmer.

Everything else is as I want it.

I am happy to reset and start over.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 19:54

Either buttons, just like a hat?

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 19:56

As long as it can detect this in DCS as single key presses for 4 directions up, down, left, right and centre, on both mini sticks, I do not care how it is achieved.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 20:00

Well, wait a bit, I'll record the video.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Andy » Tue Oct 02, 2018 20:02

Great thank you. I must go out now. I will view this later, and hopefully I will be able to blow up some targets :)

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Black box still flashing after attaching MCG to Gunfighter

Postby Ron61 » Tue Oct 02, 2018 20:43

Remove the Pov-Axes switch and make a simple button out of it. Do not forget after this (or before that), calibrate all axes. Including a flip-up trigger.
You can choose the number of hat directions - 4way or 8way. It's simple, it seems difficult only at first glance.
Video here.


Return to “Technical Support”

Who is online

Users browsing this forum: Google [Bot] and 25 guests