Gladiator Pro MkII + MCG (non-pro) possibly firmware bug (Solved - # of Tempo limit was 16)
Posted: Wed Jul 11, 2018 23:58
The default setting of the MCG works just fine as intended, but I want to set most of the buttons to be "tempo2", to allow an almost doubling of available buttons. On the base, everything is fine with it returning buttons #1 to #14 with short press and #15 to #28 as long press. The stick however, is bugged with both "tempo1" and "tempo2" settings. I set all buttons other than the two triggers to tempo2, yet the only buttons that respond properly are the middle switch up and down.
Reset #61 (Reg#8 Line5) returns 16 on press (held or not) and 15 on release, and remains stuck on 15 thereafter.
AP Off #55 (Reg#7 Line7) returns no values
Lvling #54 (Reg#7 Line6) returns a brief flash of 15, then no longer works
Gun #56 (Reg#7 Line8) returns no values
Gate Cont Push #62 (Reg#8 Line6) returns no values
#41 and #42 (Reg#6 Line1/2) work as intended
DC Forward and DC Backward #49 and #50 (Reg#7 Line 1/2) return no values
Grip Botton... button #48 (Reg#6 Line8) only returns 15 on release and remains stuck on 15
Triggers and top hat were not tested with tempo.
All buttons behave normally when set to "button" rather than "tempo" 1 or 2.
I am using Device Config v0.87.05 and firmware v1.94B
I want to attach the config file but it won't let me, saying invalid file extension. Instead I uploaded it to google drive, not sure if you can download it from there. https://drive.google.com/file/d/1trZbiJVtC7YQAn-LC--pa5PqYUzbmbJo/view?usp=sharing
Reset #61 (Reg#8 Line5) returns 16 on press (held or not) and 15 on release, and remains stuck on 15 thereafter.
AP Off #55 (Reg#7 Line7) returns no values
Lvling #54 (Reg#7 Line6) returns a brief flash of 15, then no longer works
Gun #56 (Reg#7 Line8) returns no values
Gate Cont Push #62 (Reg#8 Line6) returns no values
#41 and #42 (Reg#6 Line1/2) work as intended
DC Forward and DC Backward #49 and #50 (Reg#7 Line 1/2) return no values
Grip Botton... button #48 (Reg#6 Line8) only returns 15 on release and remains stuck on 15
Triggers and top hat were not tested with tempo.
All buttons behave normally when set to "button" rather than "tempo" 1 or 2.
I am using Device Config v0.87.05 and firmware v1.94B
I want to attach the config file but it won't let me, saying invalid file extension. Instead I uploaded it to google drive, not sure if you can download it from there. https://drive.google.com/file/d/1trZbiJVtC7YQAn-LC--pa5PqYUzbmbJo/view?usp=sharing