Sequence of operation in ZBootloader?

Moderator: AdminGroup

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Sequence of operation in ZBootloader?

Postby Drano » Sun Apr 01, 2018 19:58

I've been updating the firmware and software for my stick since I've had it the first of the year. I've had some bumps in the road along the way but have found my way through all right. So I have a question about the sequence of operation when updating the firmware with ZBootloader. I was just wondering if what I'm seeing is proper. Here's what's happening to me:

Opening Device config--all is normal. I hit bootloader and config closes as I assume it should. I check in the task manager to verify that's happened--it has closed. I know they can't run together. At this point Bootloader isn't starting on it's own as I thought it would. I start Bootloader manually. Screen is normal, stick is ready. I select new firmware, click flash it. The flashing process begins but will seem to stop near the end with a "not responding" error. Bootloader doesn't close itself out, it's just hung up. At this point Device config is trying to start. I close it so they're not running together. I end task on bootloader so now both programs are closed. I start device config manually and it appears the firmware has flashed properly as the new firmware is shown at the top. I go thru the default/calibr/load my profile sequence and we're back to normal with updated firmware.

So at the end of this process everything is updated but the process just seemed kind of odd to me where the Bootloader hangs up. Maybe that's how it's supposed to work. Would just like to know if that's the case or if there's something going on. Otherwise, everything is great with the stick!

My system and stick info is in my sig.

Thanks!
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Sequence of operation in ZBootloader?

Postby Drano » Tue Apr 17, 2018 19:49

Bump. Anyone?
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: Sequence of operation in ZBootloader?

Postby Victorus » Thu Apr 19, 2018 11:50

What versions of software do you use?
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

Ron61
Posts: 3263
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Sequence of operation in ZBootloader?

Postby Ron61 » Thu Apr 19, 2018 12:34

There is still such in the interface, it seems that the Z-bootloader hovered and did not respond and the running strip did not reach the end, but stopped somewhere in front of the FlashIt button. But after a while we will see the line Error = 0 and exit from Zbootloader. While we live with this, do not pay attention. The main result is that the firmware has been updated.

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Sequence of operation in ZBootloader?

Postby Drano » Thu Apr 19, 2018 17:38

Victorus wrote:What versions of software do you use?


I put the info in my sig. FYI I've had this "issue" all along regardless of various versions of softwares. In the end it DOES seem to update properly, it just seems like it trips over itself along the way.
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Sequence of operation in ZBootloader?

Postby Drano » Thu Apr 19, 2018 17:41

Ron61 wrote:There is still such in the interface, it seems that the Z-bootloader hovered and did not respond and the running strip did not reach the end, but stopped somewhere in front of the FlashIt button. But after a while we will see the line Error = 0 and exit from Zbootloader. While we live with this, do not pay attention. The main result is that the firmware has been updated.


OK so you're seeing that too then? And I'm not crazy! I was just wondering if it was "normal". I'm sure it'll get worked out eventually but meanwhile, as you pointed out, the stick IS updating at the end. Thanks!
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 26 guests