Severe Gunfighter MkII Axis Glitches
Posted: Sun Mar 18, 2018 6:20
The X axis inputs of my Gunfighter MkII MCG Pro is showing glitches in its response and is very noticeable in game.
Can a VKB engineer PLEASE help me? I am out of ideas.
X axis
Y axis
System Specs:
1. EVGA x79 Classified MB
2. Intel 3970X
3. 16GB RAM
4. nVidia GTX 690 Quad SLI
5. WIN 10
Connected USB Devices
USB2 Hub
1. Blue Snowball Mic
2. SteelSeries Rival 700 Mouse
3. Realforce RGB Keyboard
4. Wooting One Keyboard
5. Thrustmaster Warthog Throttle
USB3 Hub
1. VKB Gunfighter MkII MCG PRO
2. VKB MkIV Pedals connected via the Gunfighters' blackbox
VKB Devices Hardware Specs:
1. Gunfighter MkII soft center cams
2. #20 springs
3. dry clutches uninstalled
4. MkIV pedals soft center cam
5. MkIV set too normal spring force
I have been experiencing this issue for a few weeks and have been trying to solve it myself to zero affect.
Troubleshooting Techniques Attempted:
1. Physically trying all USB2 and USB3 ports on my computer
2. Making the Gunfighter the only device on it's USB Hub
3. Updating USB drivers
4. Updating ALL system drivers
5. Re-flashing Gunfighter blackbox firmware
6. Rollback to firmware version 1.91.7
7. Physically swapping out blackbox with a spare one from my MkIV pedals
8. Physically disassembling MCG PRO grip and Gunfighter base to look for crimped or damaged wiring, soldering, or leads.
Can a VKB engineer PLEASE help me? I am out of ideas.
X axis
Y axis
System Specs:
1. EVGA x79 Classified MB
2. Intel 3970X
3. 16GB RAM
4. nVidia GTX 690 Quad SLI
5. WIN 10
Connected USB Devices
USB2 Hub
1. Blue Snowball Mic
2. SteelSeries Rival 700 Mouse
3. Realforce RGB Keyboard
4. Wooting One Keyboard
5. Thrustmaster Warthog Throttle
USB3 Hub
1. VKB Gunfighter MkII MCG PRO
2. VKB MkIV Pedals connected via the Gunfighters' blackbox
VKB Devices Hardware Specs:
1. Gunfighter MkII soft center cams
2. #20 springs
3. dry clutches uninstalled
4. MkIV pedals soft center cam
5. MkIV set too normal spring force
I have been experiencing this issue for a few weeks and have been trying to solve it myself to zero affect.
Troubleshooting Techniques Attempted:
1. Physically trying all USB2 and USB3 ports on my computer
2. Making the Gunfighter the only device on it's USB Hub
3. Updating USB drivers
4. Updating ALL system drivers
5. Re-flashing Gunfighter blackbox firmware
6. Rollback to firmware version 1.91.7
7. Physically swapping out blackbox with a spare one from my MkIV pedals
8. Physically disassembling MCG PRO grip and Gunfighter base to look for crimped or damaged wiring, soldering, or leads.