Hi
I want to set the mini sticks to activate button pushes. I had no problem doing this with the master mode stick but can't get it to work with the gate cont stick.
Here are the settings I tried
Thanks
Problem setting mini stick as buttons
Moderator: AdminGroup
Re: Problem setting mini stick as buttons
Try to set 6 & 7 axes (your ministick2 input) as virtual instead of DMaRS.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Problem setting mini stick as buttons
I changed 6 and 7 to virtual
I noticed the test page only shows POV 1. Here's a shot in case it helps
and hit the set button but got no change.I noticed the test page only shows POV 1. Here's a shot in case it helps
-
- Posts: 38
- Joined: Sun Jan 15, 2017 23:44
- Has thanked: 13 times
- Been thanked: 6 times
Re: Problem setting mini stick as buttons
Not sure if I did it correctly but it works ... First set the stick back as dmars, then go to the Axes2Buttons tab, set number 5 and 6 to edges 2 for type, set the hysteresis (I think this is how far you move the stick to activate button push? I have mine set to 1%) and set the virtual button number in the last pulldown box.
Re: Problem setting mini stick as buttons
Please download firmware v.1.939 https://drive.google.com/open?id=1sz5Rh1KPsA9TqyeOAFGu-KSxaIiQOa3q
I hope problem will be resolved.
I hope problem will be resolved.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: Problem setting mini stick as buttons
Also set stanard axis bindings in external device,
in settings of POV use
in settings of POV use
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
Re: Problem setting mini stick as buttons
TS has Gladiator, so Axis#5 is analog, Throttle, Z axis. Axes 6 & 7, Rot Y & Rot Z are used for POV2. By default they are used for pedals, D-Mars type. IMHO. Thus axes numbers are right.
Try! Practice is a criterion of the truth))
Try! Practice is a criterion of the truth))
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Problem setting mini stick as buttons
I updated the firmware and tried both 5,6 and 6,7. No change yet. Here are the last settings I tried
-
- Posts: 3280
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 45 times
- Been thanked: 637 times
Re: Problem setting mini stick as buttons
A little bit of advice on how to insert and edit screenshots - when you inserted a screenshot in Paint and want it to occupy the whole place when you save it without an unnecessary white box on the right (maybe not just on the right), you need to drag a small white box to the bottom right (1) (2). Save and paste into your post. I think nothing complicated. An example with your screenshot.
Show a screenshot of the Global and Profiles tab-> Buttons-> physical and logical level.
Try it after saving the values with the Set button, press Restart next to it, on the left.
And yet, just in case, change the value in HID Usage one Slider to Dial.
Show a screenshot of the Global and Profiles tab-> Buttons-> physical and logical level.
Try it after saving the values with the Set button, press Restart next to it, on the left.
And yet, just in case, change the value in HID Usage one Slider to Dial.
Re: Problem setting mini stick as buttons
I tried changing one HID slider to dial and hit set then restart with no change.
Re: Problem setting mini stick as buttons
How do you test virtual buttons press? Joytester, Windows, Test tab of VKBDevCfg?
Save your current profile. Go to Butt0ns - logical layer tab. Press Srv button. Press Clear all button and OK in Physical layer dialog. We try to enable all buttons (No function disable) and reset logical button mapping (their numbers will correspond to physical ones). Set new settings and test stick.
You see one POV only because #HAT counter value = 1 (Global - Common tab). Check.
Try to set another first button number. Instead of 45.
Save your current profile. Go to Butt0ns - logical layer tab. Press Srv button. Press Clear all button and OK in Physical layer dialog. We try to enable all buttons (No function disable) and reset logical button mapping (their numbers will correspond to physical ones). Set new settings and test stick.
You see one POV only because #HAT counter value = 1 (Global - Common tab). Check.
Try to set another first button number. Instead of 45.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Problem setting mini stick as buttons
Congratulations!
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Who is online
Users browsing this forum: No registered users and 12 guests