Hello,
Received new Gunfighter & MCG PRO.
VKB-Sim Gunfighter Mk.II MCG Pro - English version
Default springs #20
Default cams #10
Followed instructions for downloading latest software and did all steps to update firmware. ZBootloader-C say that cleaning/download is completed, last message line is write-error-data: 0.
Tried Default button in VKBDevCfg-C.
The red stick light keeps flashing.
VKB Joytester sees joystick.
WIZZO does not find joystick.
Screens with version info etcetera & device report attached.
Please advice.
data error 0
Moderator: AdminGroup
Re: data error 0
WIZZO is intended for Gladiator family only.
Do you see axis response & buttons in VKBJoytester?
Stick LED blinking mode can be specified)). My flashes too while stick is working properly))
LED 1 flashes fast (by default, I`ve changed to ultrafast) if BUS has NO (Invert checked) errors.
LED 2 will flash in case of errors (Invert unchecked).
If your joystick works, It`s OK!
Do you see axis response & buttons in VKBJoytester?
Stick LED blinking mode can be specified)). My flashes too while stick is working properly))
LED 1 flashes fast (by default, I`ve changed to ultrafast) if BUS has NO (Invert checked) errors.
LED 2 will flash in case of errors (Invert unchecked).
If your joystick works, It`s OK!
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: data error 0
Hi Victorus,
Thank you for your reply.
I started my Pc this morning and the stick LED turned green! I don't know what has changed but now the stick is working. So, I'll just leave it as it is...
In WIZZO_gf_0_98 version the stick also is shown and I could do a calibrate. Not that it was needed but really happy now that is working.
In IL-2 I also got the buttons & axis assigned, will do more testing the coming days.
Thanks again for your help.
Huub.
Thank you for your reply.
I started my Pc this morning and the stick LED turned green! I don't know what has changed but now the stick is working. So, I'll just leave it as it is...
In WIZZO_gf_0_98 version the stick also is shown and I could do a calibrate. Not that it was needed but really happy now that is working.
In IL-2 I also got the buttons & axis assigned, will do more testing the coming days.
Thanks again for your help.
Huub.
Re: data error 0
Congratulations!!!
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Who is online
Users browsing this forum: No registered users and 106 guests