data error 0

Moderator: AdminGroup

Eetsjone
Posts: 2
Joined: Tue Jan 17, 2017 13:23

data error 0

Postby Eetsjone » Fri Feb 16, 2018 20:22

Hello,

Received new Gunfighter & MCG PRO.
VKB-Sim Gunfighter Mk.II MCG Pro - English version
Default springs #20
Default cams #10

Followed instructions for downloading latest software and did all steps to update firmware. ZBootloader-C say that cleaning/download is completed, last message line is write-error-data: 0.
Tried Default button in VKBDevCfg-C.

The red stick light keeps flashing.

VKB Joytester sees joystick.
WIZZO does not find joystick.

Screens with version info etcetera & device report attached.

Please advice.
Attachments
Screens & report.zip
(353.54 KiB) Downloaded 15 times

User avatar
Victorus
Posts: 1003
Joined: Wed Sep 21, 2011 13:25
Has thanked: 155 times
Been thanked: 126 times

Re: data error 0

Postby Victorus » Sat Feb 17, 2018 12:04

WIZZO is intended for Gladiator family only.
Do you see axis response & buttons in VKBJoytester?
Stick LED blinking mode can be specified)). My flashes too while stick is working properly))
_BUS_err.png

LED 1 flashes fast (by default, I`ve changed to ultrafast) if BUS has NO (Invert checked) errors.
LED 2 will flash in case of errors (Invert unchecked).
If your joystick works, It`s OK!

Eetsjone
Posts: 2
Joined: Tue Jan 17, 2017 13:23

Re: data error 0

Postby Eetsjone » Sat Feb 17, 2018 14:17

Hi Victorus,

Thank you for your reply.

I started my Pc this morning and the stick LED turned green! I don't know what has changed but now the stick is working. So, I'll just leave it as it is... :)

In WIZZO_gf_0_98 version the stick also is shown and I could do a calibrate. Not that it was needed but really happy now that is working.

In IL-2 I also got the buttons & axis assigned, will do more testing the coming days.

Thanks again for your help.

Huub.

User avatar
Victorus
Posts: 1003
Joined: Wed Sep 21, 2011 13:25
Has thanked: 155 times
Been thanked: 126 times

Re: data error 0

Postby Victorus » Sat Feb 17, 2018 15:23

Congratulations!!!


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 4 guests