Gladiator Pro MKII + MCG Pro Firmware

Moderator: AdminGroup

JohnSMir
Posts: 4
Joined: Wed Feb 14, 2018 12:31
Has thanked: 1 time

Gladiator Pro MKII + MCG Pro Firmware

Postby JohnSMir » Wed Feb 14, 2018 12:39

1 - Device model and version: Gladiator Pro MKII + MCG Pro (Alpha version)
2 - Controller Firmware version: _Gladiator_VKB_v1_85_B

The mode Red light is blinking and WIZZMO can't read any button or axis on the stick but X ans Y and the base

User avatar
AeroGator
Posts: 367
Joined: Wed May 31, 2017 7:40
Has thanked: 86 times
Been thanked: 147 times

Re: Gladiator Pro MKII + MCG Pro Firmware

Postby AeroGator » Fri Feb 16, 2018 9:56

JohnSMir wrote:1 - Device model and version: Gladiator Pro MKII + MCG Pro (Alpha version)
2 - Controller Firmware version: _Gladiator_VKB_v1_85_B

Nice beginning but dropped half way.
Please re-read this post: http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762 - I believe you had read it already, but please refresh.
And edit your post with all required information in full.
Best Regards,
AeroGator

User avatar
Victorus
Posts: 1012
Joined: Wed Sep 21, 2011 13:25
Has thanked: 158 times
Been thanked: 128 times

Re: Gladiator Pro MKII + MCG Pro Firmware

Postby Victorus » Fri Feb 16, 2018 11:43

Please show screenshots of External devices tab. for all connected devices. Their subtabs.

JohnSMir
Posts: 4
Joined: Wed Feb 14, 2018 12:31
Has thanked: 1 time

Re: Gladiator Pro MKII + MCG Pro Firmware

Postby JohnSMir » Sat Feb 17, 2018 14:08

I'm not sure what Film maker and lighting have anything to do with Joystick controller, but your link is: Light it up! Basic Filmmaking 3-Point Lighting and Backgrounds - The Basic Filmmaker Ep 93

Any my problem is pretty clear I'm hoping you not missing my point
The mode Red light is blinking and WIZZMO can't read any button or axis on the stick but X ans Y and the base

That mean all the button on the Gladiator Base is working, the X and Y axis is working but none of the button nor axis on the MCG Pro stick is working.

The firmware I'm using is _Gladiator_VKB_v1_85_B

The External device only show the KG-12 stick, If I install it the Bar go to full-green, install MCG Pro the Bar go bottom-red

Now due to work I can't have them with me for quite a while so I can't give you any Screen shot or any more test.

I believe what I need is the Firmware for this, but I can't find the correct one

https://vkbcontrollers.com/?product=vkb ... -w-mcg-pro

User avatar
AeroGator
Posts: 367
Joined: Wed May 31, 2017 7:40
Has thanked: 86 times
Been thanked: 147 times

Re: Gladiator Pro MKII + MCG Pro Firmware

Postby AeroGator » Sat Feb 17, 2018 15:10

JohnSMir wrote:I'm not sure what Film maker and lighting have anything to do with Joystick controller

:roll:
Damn.
I copied a wrong link, and didn't check it before posting.
A shot too many.
I meant this of course http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762.
:lol:
So please have a look at it, and write about your problem according to the guidelines.
Also, as Victorus mentioned, we need screenshots - but anyway, you will read about it in the post I referred you to.
Sorry for the mess 8) and for so many smilies.
Best Regards,
AeroGator


Return to “Technical Support”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest