Changing LVLNG button to black color

Moderator: AdminGroup

david_wi
Posts: 80
Joined: Sun Sep 25, 2016 9:38
Has thanked: 20 times
Been thanked: 11 times

Changing LVLNG button to black color

Postby david_wi » Sun Jan 28, 2018 0:41

Hi Guys

Just wanted to change the LVLNG button to the black button on my MCG Pro.
This button has two little knobs on it, so it seems it can’t be changed without completely opening the grip.
Help please :)
Thanks, David

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: Changing LVLNG button to black color

Postby AeroGator » Fri Feb 02, 2018 14:35

Yes David :( out of all buttons this one requires opening the shell.
On the bright side, when you open it you will be able to enjoy the interior that we are particularly proud of.
And by the way check the two screws that hold the grip on its shaft. Even if the grip doesn't wobble, it's good to check them on convenient occasion.
Best Regards,
AeroGator

david_wi
Posts: 80
Joined: Sun Sep 25, 2016 9:38
Has thanked: 20 times
Been thanked: 11 times

Re: Changing LVLNG button to black color

Postby david_wi » Fri Feb 02, 2018 15:45

Thanks so much AeroGator :D

User avatar
marcusstratus
Posts: 75
Joined: Sat Apr 29, 2017 5:54
Has thanked: 51 times
Been thanked: 21 times

Re: Changing LVLNG button to black color

Postby marcusstratus » Fri Feb 09, 2018 17:27

I was just about to ask about this myself. I'm not able to tell how to access this button after I've opened the grip. Are there more screws that need to take out before the front panel comes off... or is it just slid into place? I'm also paranoid about pulling wires or damaging green chips, so a brief explanation would go far.

david_wi
Posts: 80
Joined: Sun Sep 25, 2016 9:38
Has thanked: 20 times
Been thanked: 11 times

Re: Changing LVLNG button to black color

Postby david_wi » Fri Feb 09, 2018 21:15

marcusstratus wrote:I was just about to ask about this myself. I'm not able to tell how to access this button after I've opened the grip. Are there more screws that need to take out before the front panel comes off... or is it just slid into place? I'm also paranoid about pulling wires or damaging green chips, so a brief explanation would go far.

You are absolutely right for fearing wire damage and such.
I kept the gray color button as it is too risky to move inside the grip with no drawings to help.

Bye, David

Santagio
Posts: 4
Joined: Mon Jan 15, 2018 13:23
Been thanked: 1 time

Re: Changing LVLNG button to black color

Postby Santagio » Sun Feb 11, 2018 16:38

Just like you guys, I took it apart the switch out the grey. When I saw it was hiding behind circuit boards I noped it back together.
A detailed tear-down or even blow up schematic would be most welcome.


Return to “Technical Support”

Who is online

Users browsing this forum: Google [Bot] and 35 guests