Moderator: AdminGroup

Posts: 2
Joined: Mon Jan 22, 2018 1:16


Postby tephra » Mon Jan 22, 2018 1:22

Hi All,

I am having a few minor problems with my stick (new Gunfighter Pro with MCG Pro), initially the problem presented as the stick not returning properly to center 100% of the time, I increased the springs to #30's and its helped a little, but its still not perfect... Additionally its not super smooth, you can feel slight bumps/ripples as you move the stick around...

While increasing the springs from #20 to #30, I noticed that the cams surface (where it meets the bearing) was a little rough, but I also noticed that it wasn't chrome/silver it had a copper tinge to it, after reading some other threads I found some people referring to the coating coming off - i am wonder if this is occuring.

ps - I have about 2 hours run time on the stick, so barely any use at all..

ps2 - I have loosened off the dry clutches, which didn't really change anything in terms of return to centre or smoothness.

ps3 - I used the VKB Joy Tester for checking the return to centre function..

Any ideas?


User avatar
Posts: 303
Joined: Wed May 31, 2017 7:40
Has thanked: 72 times
Been thanked: 130 times

Re: smoothness

Postby AeroGator » Thu Jan 25, 2018 8:47

David good day.
Sorry for the delay - normally we come to rescue faster.
Please first read this post:
and follow all relevant guides.
I will be on it as soon as there is enough properly structured information to assess.
Best Regards,

Posts: 2
Joined: Mon Jan 22, 2018 1:16

Re: smoothness

Postby tephra » Tue Jan 30, 2018 15:00

Hey Gator!

Sorry for my delayed reply :) hehe

ill get this info together this weekend with some screen shots and post back.


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 1 guest