Gladiator calibration messed up cannot fix
Posted: Fri Jan 19, 2018 18:39
1 - Gladiator Mk.II (WWII KG12 Grip Replica (non-removable))
2 - v1.85B
3 - Default
4 - Default
5 - Wizzo v0.88, VKB Device config v0.83.96 (Njoy32 firmware v1.91)
6 - joytester screen
7 - Vkbdevcfg-c screen
After trying to calibrate my Gladiator with wizzo (i had put all deadzones to zero and ran calibration, which seem to reset back to default when restarting wizzo) the stick is now stuck with incorrect center. i tried to re-calibrate multiple times doing the following:
Load Wizzo
click start
move all axis to extremes
click stop
wizzo says it restarts but only shuts down.
tried in config tool:
click default
click "set"
click start calibration
move axis to extremes
click end calibration
after multiple attempts nothing i do changes the incorrect center position, i cannot use this stick now.
please help.
2 - v1.85B
3 - Default
4 - Default
5 - Wizzo v0.88, VKB Device config v0.83.96 (Njoy32 firmware v1.91)
6 - joytester screen
7 - Vkbdevcfg-c screen
After trying to calibrate my Gladiator with wizzo (i had put all deadzones to zero and ran calibration, which seem to reset back to default when restarting wizzo) the stick is now stuck with incorrect center. i tried to re-calibrate multiple times doing the following:
Load Wizzo
click start
move all axis to extremes
click stop
wizzo says it restarts but only shuts down.
tried in config tool:
click default
click "set"
click start calibration
move axis to extremes
click end calibration
after multiple attempts nothing i do changes the incorrect center position, i cannot use this stick now.
please help.