Gladiator calibration messed up cannot fix

Moderator: AdminGroup

scoobywan
Posts: 5
Joined: Fri Jan 19, 2018 18:15

Gladiator calibration messed up cannot fix

Postby scoobywan » Fri Jan 19, 2018 18:39

1 - Gladiator Mk.II (WWII KG12 Grip Replica (non-removable))
2 - v1.85B
3 - Default
4 - Default
5 - Wizzo v0.88, VKB Device config v0.83.96 (Njoy32 firmware v1.91)

6 - joytester screen
joytest.GIF

7 - Vkbdevcfg-c screen
config.GIF



After trying to calibrate my Gladiator with wizzo (i had put all deadzones to zero and ran calibration, which seem to reset back to default when restarting wizzo) the stick is now stuck with incorrect center. i tried to re-calibrate multiple times doing the following:
Load Wizzo
click start
move all axis to extremes
click stop
wizzo says it restarts but only shuts down.

tried in config tool:
click default
click "set"
click start calibration
move axis to extremes
click end calibration

after multiple attempts nothing i do changes the incorrect center position, i cannot use this stick now.
please help.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Gladiator calibration messed up cannot fix

Postby Ron61 » Fri Jan 19, 2018 19:47

It is necessary to update the firmware, choose from the archive for your device. Screenshots of the Profile-> Common-n-axis tab will not be superfluous.

scoobywan
Posts: 5
Joined: Fri Jan 19, 2018 18:15

Re: Gladiator calibration messed up cannot fix

Postby scoobywan » Sat Jan 20, 2018 0:36

i did "reset to default" in windows game controller settings and it fixed the off center problem!

now i have another problem that when i load the bootloader to up my firmware, it says "device not connected" and i cannot flash. but the device IS connected and working so why it says disconnect in bootloader?


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 26 guests