Calibration after flashing v1.91F

Moderator: AdminGroup

rtrski
Posts: 279
Joined: Mon Sep 11, 2017 0:20
Has thanked: 101 times
Been thanked: 135 times

Re: Calibration after flashing v1.91F

Postby rtrski » Sat Jan 27, 2018 17:51

PabstBleuRibbon wrote:I have this exact same issue with the latest 1.921. I'll try the FW version posted in this thread to see if it fixes it.


Yeah, I really need to know WHAT firmware version is right for WHAT Gunfighter base and/or Blackbox. I have a MkII Gunfighter (B), and an MCG-Pro. Current advice from VKBcontrollers is just to use the 'latest'.

I just tried the MCG-Pro version of firmware in the 1_92_1 zip download, and have random buttons all over. I changed my stick to default and set before flashing, after flashing,and then calibrated. I was absolutely sure to grab the FW from the pro folder.

Going back to 1_91_E where I was before (I never made it to the F!) gets me back where I think I should be - no excess buttons lit. KDHi and KDLo look good (no 255's, all in a 70-150 sort of range) except for (a) the #7 Axis, which I think is the Z (twist, so nothing installed), and the high side of the #8 Axis (Brake).

As I have no intent to switch grips around, and likely won't be getting VKB pedals either, I guess I'll just ride the 1_91_E until told it's going to kill me horribly, or something....since 1_91_E is also where I made changes to 'Save' a .cfg file I was also comfortable re-loading it back after re-calibration.
RH VKB GF Mk III + Modern Combat Grip *ULTIMATE* (12/17 GFII , upgraded), _powered_ deploy!
LH VKB GF Mk III + Kosmosima Prem (02/19 GFII, upgraded), *lateral* mounted
Feet: Slaw Viper RX Pedals [Sorry, VKB, too gorgeous]

PabstBleuRibbon
Posts: 10
Joined: Sun Nov 19, 2017 19:18
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby PabstBleuRibbon » Mon Jan 29, 2018 22:32

Try 1_92_9, which is posted in the 2nd page of this thread. Nowhere on the ftp site, I don't know why they haven't put it there. 1.92.9 fixed the issues for me on my GF mkII/MCG Pro.

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: Calibration after flashing v1.91F

Postby AeroGator » Wed Jan 31, 2018 15:19

PabstBleuRibbon wrote:I have this exact same issue with the latest 1.921. I'll try the FW version posted in this thread to see if it fixes it.

Any news?
oooops, first posted, then saw your latest comment. anyway, keep me updated.
Best Regards,
AeroGator

PabstBleuRibbon
Posts: 10
Joined: Sun Nov 19, 2017 19:18
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby PabstBleuRibbon » Mon Feb 12, 2018 22:02

Hi AeroGator,
I've been running 1_92_9 without issue, no phantom button presses.

Any idea when we'll see a release version of firmware/software with the updated MCG trigger functionality? I grabbed a beta version of VKBDevCFG but it didn't seem to recognize my brake lever axis, so I didn't try to use it for any tweaking.


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 25 guests