GF mk1 firmware update issues
Posted: Fri Jan 12, 2018 21:29
Hi VKB,
Following the instructions for the most recent firmware update for GFmk1, for MCG/Kg12 compatibility. I installed the MCG-P grip (was a WH before, which worked fine), then started the process:
- latest VKBDevCFG
- latest firmware in the directory (BB_GF_MCGP_v1_91_E)
- ZBootloader-C in the directory
- Swapped WH grip for MCG-P
On startup, Blackbox is flashing red, I figured because of the new Grip without matching firmware/profile. I do the following:
- Launch VKBDevCFG
- Select "VKBSim Black Box GF v1.852"
- Click "Bootloader"
VKBDevCFG shuts down and starts ZBootloader. However, the Blackbox immediately turns off with no lights on at all. Zbootloader shows:
Nothing happens after that. If I disconnect/reconnect the Blackbox it boots back up, in the same state as beginning of the process.
I have also tried restarting the process with just running Zbootloader. Here is what that looks like:
However, the Blackbox is still on with lights if I just run Zbootloader, it does not turn off immediately like with VKBDevCFG.
Any help appreciated!
Following the instructions for the most recent firmware update for GFmk1, for MCG/Kg12 compatibility. I installed the MCG-P grip (was a WH before, which worked fine), then started the process:
- latest VKBDevCFG
- latest firmware in the directory (BB_GF_MCGP_v1_91_E)
- ZBootloader-C in the directory
- Swapped WH grip for MCG-P
On startup, Blackbox is flashing red, I figured because of the new Grip without matching firmware/profile. I do the following:
- Launch VKBDevCFG
- Select "VKBSim Black Box GF v1.852"
- Click "Bootloader"
VKBDevCFG shuts down and starts ZBootloader. However, the Blackbox immediately turns off with no lights on at all. Zbootloader shows:
Nothing happens after that. If I disconnect/reconnect the Blackbox it boots back up, in the same state as beginning of the process.
I have also tried restarting the process with just running Zbootloader. Here is what that looks like:
However, the Blackbox is still on with lights if I just run Zbootloader, it does not turn off immediately like with VKBDevCFG.
Any help appreciated!