Shift and Macro Questions

Moderator: AdminGroup

LHR
Posts: 2
Joined: Sun Jan 07, 2018 5:50

Shift and Macro Questions

Postby LHR » Sun Jan 07, 2018 19:49

1 - Gunfighter with MCG Pro (rev B)
2 - Firmware reported by VKBDeviceConfig v0.83.85 (NJoy32 v1.91) is "v1.917"
3. Default springs/cams, nothing changed out of the box
4. Default springs/cams, nothing changed out of the box
5. Software being used is VKBDeviceConfig v0.83.85 (NJoy32 v1.91)

Question 1:
Am I able to set trigger 2 to be a shift? I want to set it so that when it is flipped up, it acts as if shift1 is active for all other buttons. Is that possible?

Question 2:
I have no macro tab at the bottom. I want to set macros. I have never had the tab, but I can set buttons to macros, When I do, I get the error: "Cannot focus a disabled or invisible window". Which leads me to hope that I can enable/unhide it somehow?

User avatar
AeroGator
Posts: 238
Joined: Wed May 31, 2017 7:40
Has thanked: 56 times
Been thanked: 94 times

Re: Shift and Macro Questions

Postby AeroGator » Thu Jan 11, 2018 14:24

LHR wrote:trigger 2 to be a shift?

What is Trigger 2? Pls ask so that I don't have to guess. I'm not grumbling, just trying to save time yours and mine.
LHR wrote:I want to set macros.

It is possible; we don't want to get into it now, as you can see we're having a landslide of basic how to questions that eat out nearly all time. However we will return to this topic when time permits; I wouldn't say next week, rather some 6-8 weeks later. Remind me later, I will surely forget if you don't!
Best Regards,
AeroGator

LHR
Posts: 2
Joined: Sun Jan 07, 2018 5:50

Re: Shift and Macro Questions

Postby LHR » Fri Jan 12, 2018 2:17

Oh sorry By trigger 2 I mean the foldable trigger.

I am fine with waiting for an answer on the macros, I will check back in a few weeks.

User avatar
AeroGator
Posts: 238
Joined: Wed May 31, 2017 7:40
Has thanked: 56 times
Been thanked: 94 times

Re: Shift and Macro Questions

Postby AeroGator » Fri Jan 12, 2018 8:07

LHR wrote:Oh sorry By trigger 2 I mean the foldable trigger. I will check back in a few weeks.

Got it. In the meantime (in fact, the sooner the better) please update the FW (see our Announcements section; uploaded minutes ago).
Best Regards,
AeroGator

RecklessPrudence
Posts: 51
Joined: Mon Aug 22, 2016 18:11
Has thanked: 7 times
Been thanked: 19 times

Re: Shift and Macro Questions

Postby RecklessPrudence » Mon Jan 15, 2018 5:49

LHR wrote:Oh sorry By trigger 2 I mean the foldable trigger.

I am fine with waiting for an answer on the macros, I will check back in a few weeks.

Ron61 shows how to enable the Macro tab here. That's how I got it.


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 4 guests