Are my dampers too tight?
Moderator: AdminGroup
-
- Posts: 68
- Joined: Wed Feb 03, 2016 2:25
- Location: Redlands, California
- Has thanked: 66 times
- Been thanked: 11 times
Are my dampers too tight?
Today, I received my Gunfighter joystick, and when I was looking at the manual, it says the nut should not protrude past the screw on the damper. The photo below shows how they were installed at the factory. Do I need to adjust them, or are they alright as-is?
that was the wrong book....
Sorry! In a hurry we probably put a wrong manual into the box.
I believe you received your device (MkII) with the manual for the previous version.
Our fault but we were just trying to catch up with the time.
Anyway, here is the link to the updated manual. You only need the last section of it (the rest is the same for both versions).
https://vkbcontrollers.com/?product=gunfighter-quick-operations-guide
Hope it helps. Sorry for your time wasted on trying to solve the problem.
I believe you received your device (MkII) with the manual for the previous version.
Our fault but we were just trying to catch up with the time.
Anyway, here is the link to the updated manual. You only need the last section of it (the rest is the same for both versions).
https://vkbcontrollers.com/?product=gunfighter-quick-operations-guide
Hope it helps. Sorry for your time wasted on trying to solve the problem.
Best Regards,
AeroGator
AeroGator
Who is online
Users browsing this forum: Bing [Bot] and 15 guests