Hey,
I recently bought a gunfighter and I already own the Trudder mkIV's. The problem is they both came with their own blackbox, however, It appears im not able to use both on 1 blackbox. The Trudder blackbox only recognizes the Trudder, and the GF box only recognizes the gunfighter.
Is this a known limitation, or is my setup broken? I'd very much like not to have to use independant blackbox setups for each item...
Can't use T-Rudder Mk IV pedals with my Gunfighter Pro...?
Moderator: AdminGroup
-
- Posts: 3276
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Can't use T-Rudder Mk IV pedals with my Gunfighter Pro...?
When using one Blackbox to connect GF and Trudder, you need to download the corresponding profile. With virtual brakes or without.
Re: Can't use T-Rudder Mk IV pedals with my Gunfighter Pro...?
UIV wrote:Connect the pedals to GF Blackbox.
After connecting the pedals, you must recalibrate the joystick by VKBDev-Cfg software.
How...?
Re: Can't use T-Rudder Mk IV pedals with my Gunfighter Pro...?
Please, read this post. viewtopic.php?f=25&t=2762
We need more info from you.
We need more info from you.
Re: Can't use T-Rudder Mk IV pedals with my Gunfighter Pro...?
UIV wrote:Please, read this post. viewtopic.php?f=25&t=2762
We need more info from you.
1 - T-Rudder MK.IV + Gunfighter base + KG12 stick
2 - VKBsim Black Box GF v1.86c Pro
3 - 10g springs, 2
4 - 10g cams
5 - (not applicable)
6 - Vkbjoytester screenshots.
https://imgur.com/T5muKZM
7 - Vkbdevcfg-c screenshots.
https://imgur.com/kXrxIs2
https://imgur.com/KLtNx0Y
https://imgur.com/PwzoVni
https://imgur.com/ZUrKVKT
https://imgur.com/Fa6hWxr
Now I've got one blackbox that recognizes both the T-Rudder and the Gunfighter, but doesn't recognize any buttons on the KG12 stick, and the other box recognizes still only the Gunfighter axises but not it's buttons...
Very confusing, very complicated...My Trudder worked wonderfully out of the box, but it seems like getting VKB products to work together requires a lot of programming knowledge which I don't have, nor want to learn just to use a joystick. Had I known this, I don't know if i would have went with VKB over Virpil...
Re: Can't use T-Rudder Mk IV pedals with my Gunfighter Pro...?
After 2 days, I was finally able to figure this out myself.
The D_MARs sensor values in the profiles were disabled, the bus for the stick had a fault in it, and required a remount and the stick itself had to be recalibrated.
The D_MARs sensor values in the profiles were disabled, the bus for the stick had a fault in it, and required a remount and the stick itself had to be recalibrated.
Who is online
Users browsing this forum: No registered users and 80 guests