Just got my pedals and I love em' ..best most accurate set I've ever had...But I'm having a hell of a time setting up the toe brakes with the new software ....I start it up ...it sees the warthog button I set but when I hold it it dosent set toe brakes in action ...just stays on rudder ....any place that has a good tutorial to get it up and running? I downloaded their pdf and followed it but I cant seem to get it to work. 69.5 is the version I am using ..version 1.816 on the black box.....I hit start/stop ....sending data ....click set ....press button .....says "brake source :button 15" ..so it sees the button setting.....press button 15 and hold but shows only one axis... x rotation ....the red light comes on by the brakes but not working.
This is what mine looks like with brake button pressed and right rudder pedal pushed down ...no go Help appreciated thanks
[RESOLVED] T-Link issue with new pedals
Moderator: AdminGroup
Re: T-Link issue with new pedals
Got it sorted ...found a thread with this in it
1) Download and unzip:
- Profile for T-Link support http://ftp.vkb-sim.pro/Profiles/BlackBo ... 1_81_6.zip
- T-Link v.0.66.2 http://ftp.vkb-sim.pro/Programms/T_link_v0_66_2.zip
- VKBDevCgf-C v.0.78.9.9 http://ftp.vkb-sim.pro/Programms/VKBDev ... 78_9_9.zip
- VkbJoyTester http://ftp.vkb-sim.pro/Programms/VKB_JoyTester.zip
2) Run VkbDevCfg-C and load the profile to the controller:
- Click on the BlackBox controller name
- Click on the "Load" button
- Click on the "Set" button
- Close VkbDevCfg-C
3) Run T-Link
- Click on the "SET" square button (left side)
- Press a button on the joystick for "brake" function
- Click on the "Start/Stop" button (T-link start to send data to the BlackBox)
4) For test the brakes run vkbJoyTester (or can use Windows gaming controller applet). Choose the BlackBox controller. Press the "Brake" button on the joystick and move the pedals.
P.S. Never run T-Link and VkbDevCfg-C together!
1) Download and unzip:
- Profile for T-Link support http://ftp.vkb-sim.pro/Profiles/BlackBo ... 1_81_6.zip
- T-Link v.0.66.2 http://ftp.vkb-sim.pro/Programms/T_link_v0_66_2.zip
- VKBDevCgf-C v.0.78.9.9 http://ftp.vkb-sim.pro/Programms/VKBDev ... 78_9_9.zip
- VkbJoyTester http://ftp.vkb-sim.pro/Programms/VKB_JoyTester.zip
2) Run VkbDevCfg-C and load the profile to the controller:
- Click on the BlackBox controller name
- Click on the "Load" button
- Click on the "Set" button
- Close VkbDevCfg-C
3) Run T-Link
- Click on the "SET" square button (left side)
- Press a button on the joystick for "brake" function
- Click on the "Start/Stop" button (T-link start to send data to the BlackBox)
4) For test the brakes run vkbJoyTester (or can use Windows gaming controller applet). Choose the BlackBox controller. Press the "Brake" button on the joystick and move the pedals.
P.S. Never run T-Link and VkbDevCfg-C together!
Re: [RESOLVED] T-Link issue with new pedals
Well, I used do this for test T.Link virtual brakes... without "colateral" effects.
But now that T.Link include graphics bar for brakes test is not need open both.
But now that T.Link include graphics bar for brakes test is not need open both.
Last edited by Sokol1 on Sat Jul 08, 2017 4:34, edited 2 times in total.
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: [RESOLVED] T-Link issue with new pedals
It is possible to get the same result with pedals connected directly to the joystick or to а single BlackBox. Do not need T-Link and release one USB port. About this here.
Who is online
Users browsing this forum: Google [Bot] and 105 guests