Gunfighter. Led's

Moderator: AdminGroup

Cyranis
Posts: 7
Joined: Mon May 15, 2017 22:50

Gunfighter. Led's

Postby Cyranis » Thu Jun 29, 2017 5:25

With my gunfighter and pedals connected to my blackbox, I have a single blue LED lit. Neither led for the stick or pedals is lit up. IS this normal? Everything works btw. Just no lights.

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: Gunfighter. Led's

Postby AeroGator » Thu Jun 29, 2017 7:27

Here is a simple solution.
Option 1: wait for a new CFG version - might take a week or so.
Option 2: get your hands dirty.

If you go for Option 2, you're doing it at your own risk :shock:
before everything, reset to factory defaults.
Then:
a - go to CFG folder, wherever you saved it.
b - find zconfig.ini; open it in notepad or similar program
c - find User section in this file
d - add User=Developer as a new line in this section
e - if there is no User section, add the following at the end of the file:
[User]
User=Developer
f - save the file
g - open the CFG and load your profile
h - take off and shoot them all down.

Tell me if it works.
Best Regards,
AeroGator

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: Gunfighter. Led's

Postby AeroGator » Thu Jun 29, 2017 10:02

UPDATE:
http://ftp.vkb-sim.pro/Programms/VKBDevCfg-C_v0_81_83.zip
Here it is, fresh and fragrant, the new FW. Hopefully, no more LED problems.
Best Regards,
AeroGator

Cyranis
Posts: 7
Joined: Mon May 15, 2017 22:50

Re: Gunfighter. Led's

Postby Cyranis » Thu Jun 29, 2017 16:12

Reloaded the profile, led's work fine now. Thanks

hazel
Posts: 35
Joined: Thu Apr 27, 2017 15:05
Has thanked: 8 times
Been thanked: 4 times

Re: Gunfighter. Led's

Postby hazel » Thu Jun 29, 2017 22:46

I'm using Gunfighter with custom DIY grip, it has separate PCB and is not conected to GF. Red diode (stick diode) on BlackBox is blinking all the time :oops: ( i guess cause the standard K12 grip is not connected). Is there a way to turn off this red blinking?

TheBigDustin
Posts: 21
Joined: Mon Jun 05, 2017 14:56
Has thanked: 2 times
Been thanked: 4 times

Re: Gunfighter. Led's

Postby TheBigDustin » Fri Jun 30, 2017 0:20

Tape?

hazel
Posts: 35
Joined: Thu Apr 27, 2017 15:05
Has thanked: 8 times
Been thanked: 4 times

Re: Gunfighter. Led's

Postby hazel » Fri Jun 30, 2017 2:54

Thanks but...looking for more software solution than hardware MacGyver style. :)

User avatar
UIV
Мастер
Posts: 5244
Joined: Mon Apr 17, 2006 16:33
Has thanked: 24 times
Been thanked: 372 times

Re: Gunfighter. Led's

Postby UIV » Fri Jun 30, 2017 7:22

It's easy.
111.jpg

hazel
Posts: 35
Joined: Thu Apr 27, 2017 15:05
Has thanked: 8 times
Been thanked: 4 times

Re: Gunfighter. Led's

Postby hazel » Fri Jun 30, 2017 13:36

Thank You UIV 8)

aemvee
Posts: 9
Joined: Thu Jun 09, 2016 14:50
Has thanked: 7 times
Been thanked: 3 times

Re: Gunfighter. Led's

Postby aemvee » Sat Jul 01, 2017 0:27

Can I dim/turn off blue led from the Black Box?

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: Gunfighter. Led's

Postby Victorus » Sat Jul 01, 2017 15:18

Look here http://forum.vkb-sim.pro/viewtopic.php?f=3&t=1846.
About LEDs control. LED settings are the same for all VKB controllers.You can dim rgb KEDs only. BB LEDs may be switched on/off only.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

aemvee
Posts: 9
Joined: Thu Jun 09, 2016 14:50
Has thanked: 7 times
Been thanked: 3 times

Re: Gunfighter. Led's

Postby aemvee » Sat Jul 01, 2017 23:26

Hum, It seems that I don't have LED tab on my v0.81.83. Do I have to enable that somehow.

Ron61
Posts: 3263
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Gunfighter. Led's

Postby Ron61 » Sat Jul 01, 2017 23:49



Return to “Technical Support”

Who is online

Users browsing this forum: Google [Bot] and 44 guests