VKB-SIM

With my gunfighter and pedals connected to my blackbox, I have a single blue LED lit. Neither led for the stick or pedals is lit up. IS this normal? Everything works btw. Just no lights.

Here is a simple solution.
Option 1: wait for a new CFG version - might take a week or so.
Option 2: get your hands dirty.

If you go for Option 2, you're doing it at your own risk
before everything, reset to factory defaults.
Then:
a - go to CFG folder, wherever you saved it.
b - find zconfig.ini; open it in notepad or similar program
c - find User section in this file
d - add User=Developer as a new line in this section
e - if there is no User section, add the following at the end of the file:
[User]
User=Developer
f - save the file
g - open the CFG and load your profile
h - take off and shoot them all down.

Tell me if it works.

UPDATE:
http://ftp.vkb-sim.pro/Programms/VKBDevCfg-C_v0_81_83.zip
Here it is, fresh and fragrant, the new FW. Hopefully, no more LED problems.

Reloaded the profile, led's work fine now. Thanks

I'm using Gunfighter with custom DIY grip, it has separate PCB and is not conected to GF. Red diode (stick diode) on BlackBox is blinking all the time ( i guess cause the standard K12 grip is not connected). Is there a way to turn off this red blinking?

Tape?

Thanks but...looking for more software solution than hardware MacGyver style.

It's easy.

Thank You UIV

Can I dim/turn off blue led from the Black Box?

Look here http://forum.vkb-sim.pro/viewtopic.php?f=3&t=1846.
About LEDs control. LED settings are the same for all VKB controllers.You can dim rgb KEDs only. BB LEDs may be switched on/off only.

Hum, It seems that I don't have LED tab on my v0.81.83. Do I have to enable that somehow.

To look here http://forum.vkb-sim.pro/viewtopic.php?f=3&t=1846#p17551.