[RESOLVED] Gunfighter + T-Rudder pedals + black box not working

Moderator: AdminGroup

Wowaegon
Posts: 17
Joined: Fri Sep 09, 2016 5:18
Been thanked: 4 times

[RESOLVED] Gunfighter + T-Rudder pedals + black box not working

Postby Wowaegon » Sun May 07, 2017 17:37

Hello, I'm having issues with my Gunfighter + T-Rudder pedals + black box included with the Gunfighter. Gunfighter works fine in VKB device config if I go to the test->axes 1 tab. I can see Axis X and Axis Y move with the corresponding stick movements. However, the Z axis will not move. If I use the black box that was included with the T-Rudder pedals, all 3 axes work just fine. I've done the calibration with the new (included with gunfighter) black box but that doesn't seem to make a difference. When the gunfighter and T-Rudder pedals are plugged into the non-working black box, I get a green LED on both Stick and Pedals and a blue LED on Sys. When the gunfighter and T-Rudder pedals are plugged into the working black box, I get red LEDs on Sys, Stick and pedals. Any ideas? Did I get a bad black box?
Last edited by Wowaegon on Mon May 08, 2017 15:35, edited 1 time in total.

User avatar
UIV
Мастер
Posts: 5244
Joined: Mon Apr 17, 2006 16:33
Has thanked: 24 times
Been thanked: 372 times

Re: Gunfighter + T-Rudder pedals + black box not working

Postby UIV » Mon May 08, 2017 7:19

When the first time you calibrated the joystick, the pedals were connected to Blackbox?

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: Gunfighter + T-Rudder pedals + black box not working

Postby Victorus » Mon May 08, 2017 13:23

Please download Vkbdevcfg.exe Image. Unpack and launch. Connect one of Black Boxes with plugged devices, click device name and make screenshot (Alt+PrtScreen) of Action-Global-External-External devices and Profile-Common-n-Axes tabs. Make the same screenshots for another BB and upload screenshots here.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

Wowaegon
Posts: 17
Joined: Fri Sep 09, 2016 5:18
Been thanked: 4 times

Re: Gunfighter + T-Rudder pedals + black box not working

Postby Wowaegon » Mon May 08, 2017 15:17

Got it. I thought I had compared the Common-n-Axes tabs but turns out that I missed inputs 6-8 were set to disabled on one of them. Both black boxes are working now. Thanks!

Edit: Just in case it's helpful to anyone else, here's what I had to ensure was set the same between the boxes.

Working-common-n-axes.jpg

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: [RESOLVED] Gunfighter + T-Rudder pedals + black box not working

Postby Victorus » Mon May 08, 2017 20:22

Hurray!
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 17 guests