Hi!
I have used my BM Mk.II with a TM Warthog grip, and set the NJOY up for that. Now I want to use the original VKB grip. How do I set it up for this grip? I tried looking for cfg files, but couldn't find any.
Need help setting up Black Mamba Mk. II
Moderator: AdminGroup
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: Need help setting up Black Mamba Mk. II
Not sure if this helps, but you could always edit your zconfig.ini file, and enter "user=developer" beneath the [USER] entry, which should enable a new button within the VKBdevCfg software that allows you to reset your stick back to default.
If this doesn't help, someone with more knowledge will help you further when they get around it.
If this doesn't help, someone with more knowledge will help you further when they get around it.
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
Re: Need help setting up Black Mamba Mk. II
Hey Bo!
The user=developer trick didn't work.
However, setting the stick up with regular buttons and one encoder is a breeze! Let me toy a little more with the settings and I can send you the setup. PM me an email address.
The user=developer trick didn't work.
However, setting the stick up with regular buttons and one encoder is a breeze! Let me toy a little more with the settings and I can send you the setup. PM me an email address.
Re: Need help setting up Black Mamba Mk. II
There were no [USER] section at all in my file, so I created it.
Should I add the first line you circled in red as well?
Doesn't matter much now though, since I have managed to map the buttons the way I want them.
But there would be a good idea for VKB to add the default profile in the downloads section.
Should I add the first line you circled in red as well?
Doesn't matter much now though, since I have managed to map the buttons the way I want them.
But there would be a good idea for VKB to add the default profile in the downloads section.
Re: Need help setting up Black Mamba Mk. II
Troll wrote:Hi!
I have used my BM Mk.II with a TM Warthog grip, and set the NJOY up for that. Now I want to use the original VKB grip. How do I set it up for this grip? I tried looking for cfg files, but couldn't find any.
How have you assigned the controls of TMW grip for using? I suggest you used VKBDevCfg-C.exe tool.
Download up to date version http://forum.vkb-sim.pro/viewtopic.php?f=15&t=908, 01.02.2017
v. 0.79.03
Download, unpack and load fresh firmware for BM http://forum.vkb-sim.pro/download/file.php?id=4536
If you have added User=Developer string to ini file, you will find Default button on tools tab. Try to push it. All joystick settings will be set to default values. I recommend to save you current settings for TMW grip (Save button).
If you do not like some settings, try to reassign buttons using VKBDevCfg-C.exe. We`ll work together))
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Need help setting up Black Mamba Mk. II
Victorus wrote:How have you assigned the controls of TMW grip for using? I suggest you used VKBDevCfg-C.exe tool.
Download up to date version http://forum.vkb-sim.pro/viewtopic.php?f=15&t=908, 01.02.2017
v. 0.79.03
Download, unpack and load fresh firmware for BM http://forum.vkb-sim.pro/download/file.php?id=4536
If you have added User=Developer string to ini file, you will find Default button on tools tab. Try to push it. All joystick settings will be set to default values. I recommend to save you current settings for TMW grip (Save button).
If you do not like some settings, try to reassign buttons using VKBDevCfg-C.exe. We`ll work together))
Thanks for replying!
I used the VKBDevCfg to set it up for the TMW grip, but that was a long time ago...
I will try using the new software.
Re: Need help setting up Black Mamba Mk. II
Ok...
I have downloaded VKB Dev Cfg v0.79.04.
When I click in the line that says "VKB Black Mamba v1.74A PRO :HID-compliant game Controller" I get an error Message saying: "Access violation at address 005AB8D1 in module 'VKBDevCfg-C.exe' Read of address FFFFFFFD"
How do I Upgrade the firmware?
I have downloaded VKB Dev Cfg v0.79.04.
When I click in the line that says "VKB Black Mamba v1.74A PRO :HID-compliant game Controller" I get an error Message saying: "Access violation at address 005AB8D1 in module 'VKBDevCfg-C.exe' Read of address FFFFFFFD"
How do I Upgrade the firmware?
Re: Need help setting up Black Mamba Mk. II
Ron61 wrote:Download this file and select your firmware.
That's the same file, containing all the firmware files, that Victorious linked to.
But how do I install the firmware file? Select it? With what? Where?
-
- Posts: 3263
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Need help setting up Black Mamba Mk. II
Reading http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2482&start=15#p25106 and doing your joystick respectively.
Who is online
Users browsing this forum: No registered users and 10 guests