Hi,
I downloaded T-link V06.28 from the VKB USA website and tried to use it to configure toe brakes on my T-rudder. My T-Rudder Black Box is running V1.8 firmware.
When I click "Start" in the T-Link GUI, the following message appears: "Controller doesn't support T-link - Upgrade Firmware" and I have to close T-link.
I can't find any firmware newer than what I'm running, i.e., V1.8.
Help, Please.
[RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Moderator: AdminGroup
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
[RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Last edited by jjohnson241 on Mon Jan 16, 2017 21:29, edited 1 time in total.
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: T-Link not working with VKJB Mk IV T-Rudder Pedals
Hi,
I contacted UIV for him to look at your post. He should be able to provide more info. It might be possible that the T-Link software will have to be updated by VKB in order to be compatible with the Black Box controller. Stay tuned!
I contacted UIV for him to look at your post. He should be able to provide more info. It might be possible that the T-Link software will have to be updated by VKB in order to be compatible with the Black Box controller. Stay tuned!
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
Re: T-Link not working with VKJB Mk IV T-Rudder Pedals
Thanks.
I was under the impression that the new version (V628) had been updated to include T-rudders with the Black Box. We were advised that such an update would be coincident with the arrival of the Gunfighter joysticks.
I've had my rudder pedals since October 2016 and have been waiting for the "Gunfighter", i.e., Black Box update, to T-link.
If the version of T-link that is noted and available for download on the VKB USA website is in fact incompatible with Black Box T-Rudders, then a notice as such should be posted on the VKB Website to avoid the confusion for US buyers.
I was under the impression that the new version (V628) had been updated to include T-rudders with the Black Box. We were advised that such an update would be coincident with the arrival of the Gunfighter joysticks.
I've had my rudder pedals since October 2016 and have been waiting for the "Gunfighter", i.e., Black Box update, to T-link.
If the version of T-link that is noted and available for download on the VKB USA website is in fact incompatible with Black Box T-Rudders, then a notice as such should be posted on the VKB Website to avoid the confusion for US buyers.
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: T-Link not working with VKJB Mk IV T-Rudder Pedals
Good point. For that, however, I would need to be 100% sure about this myself before I remove the link. Waiting on feedback from UIV (and hopefully some info on an updated software version).
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: T-Link not working with VKJB Mk IV T-Rudder Pedals
We might have to wait until the work week starts again.
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: T-Link not working with VKB Mk IV T-Rudder Pedals
To elaborate a bit - VKB has switched to a different IDE (integrated development environment) and they're having some issue with some of the libraries; on top of that, they encountered some bugs with the T-Link software they're wanting to beta test. So, a little more patience is needed.
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
Re: T-Link not working with VKB Mk IV T-Rudder Pedals
Ok, more patience given.
Thanks for the elaboration.
Thanks for the elaboration.
-
- Posts: 17
- Joined: Sun Sep 11, 2016 17:21
- Been thanked: 4 times
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: T-Link not working with VKB Mk IV T-Rudder Pedals
Latest news is that ILya is waiting on Alex (the developer) to deliver the latest beta build; Ilya told me he's going to ask again...
Since I am not a developer, and without having any insights into the process, I would like to have this out for testing and in your hands "yesterday", but then again, if I were a developer I might realize how tedious this might be considering a) it's not the only project Alex is working on, and b) having a new software IDE might complicate things. So right now, everybody is stuck in the waiting "loop".
Since I am not a developer, and without having any insights into the process, I would like to have this out for testing and in your hands "yesterday", but then again, if I were a developer I might realize how tedious this might be considering a) it's not the only project Alex is working on, and b) having a new software IDE might complicate things. So right now, everybody is stuck in the waiting "loop".
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
Who is online
Users browsing this forum: Google [Bot] and 90 guests