[RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Moderator: AdminGroup
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Please describe what are you doing, step by step. I.E connected pedals, ran T-link. What messages have you seen. what is other device you want to connect to.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
-
- Posts: 12
- Joined: Tue Feb 07, 2017 3:53
- Been thanked: 2 times
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
I've connected peddles to blackbox then plugged into my PC. Everything installs properly and I can calibrate through windows, buy as soon as I try to open the t link software or open the VKBDevCfg-C.exe. I get the message device could not be opened.
I borrowed a friend's gladiator and if I connect the peddles to them I can get them to show through wixx as a axis and calibrate the stick and peddles together.
As mentioned it shows up as a device and send to work but can't seem to get the software to connect to the black box for your firmware update it calibration.
I borrowed a friend's gladiator and if I connect the peddles to them I can get them to show through wixx as a axis and calibrate the stick and peddles together.
As mentioned it shows up as a device and send to work but can't seem to get the software to connect to the black box for your firmware update it calibration.
-
- Posts: 12
- Joined: Tue Feb 07, 2017 3:53
- Been thanked: 2 times
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Hi UAV This is what I get when I try and connect through t link and these are from different versions of the VKB Device config program. I have a razer orbweaver stealth but have tried with this and other devices unplugged
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
I can not read. Please upload screenshots in the normal resolution.
P.S. Alt+PrintScreen buttons copy only active window to clipboard.
P.S. Alt+PrintScreen buttons copy only active window to clipboard.
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Use Alt+PrtScr. Pedals are disconnected. It is very hard to read on your 1st screenshot( Try to reconnect.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Everything installs properly and I can calibrate through windows
And don't use Windows calibration - can use the wizard (joy.cpl) for test.
-
- Posts: 12
- Joined: Tue Feb 07, 2017 3:53
- Been thanked: 2 times
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
I've not calibrated them yet. I used windows device to detect an input then used the ones from VKB FTP drive. All screen shots where taken with black box and peddles connected. As I said I can load up star citizen or dcs and get them to work but when it comes to using the VKB software depending on the version it either says device won't open or just says there's a read error
-
- Posts: 12
- Joined: Tue Feb 07, 2017 3:53
- Been thanked: 2 times
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Thats what I get and firmware is stock as it only arrived on friday and havent managed to get it to connect to the software. Only version that shows my black box is v0.52.22 can comes up with a crc error read data error try again the latest versions just come up with the image attached
- Attachments
-
- error2.jpg (13.61 KiB) Viewed 5463 times
-
- Posts: 12
- Joined: Tue Feb 07, 2017 3:53
- Been thanked: 2 times
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
Think I've got it sorted know the out it was a problem with Windows 10 not giving all the right permissions to the program. Had to change a couple of settings but works great know.
Could you give me a link for how to set up my own profiles, I want to get my head round everything before I get my gunfighter Pro.
Could you give me a link for how to set up my own profiles, I want to get my head round everything before I get my gunfighter Pro.
Re: [RESOLVED] T-Link not working with VKB Mk IV T-Rudder Pedals
ariley1984 wrote:Think I've got it sorted know the out it was a problem with Windows 10 not giving all the right permissions to the program. Had to change a couple of settings but works great know.
Could you give me a link for how to set up my own profiles, I want to get my head round everything before I get my gunfighter Pro.
Which settings?
I have exactly the same problem.
Who is online
Users browsing this forum: Bing [Bot] and 104 guests