VKB-SIM

louviljlj wrote:I did answer you questions u must not have read missed my previous post. I did not run in windows. Do u want me to? I posted previously that I dont know how to insert an image I see the img icon but when I select it it just inserts text. Give me more info on how to insert an image. Yes I would like u to really help

Step 1

Step 2

Yep I tried. I have a bad stick Rudder port or bad card. What do I need to do to get a replacement board for it?

What have you tried? To attach image?

What have u done to answer my question about what is different about rudder hookup compared to the joystick and throttle? It seems that one the stick is hooked up to the rudder port it should be the same as the others. Please explain why it is different?
I tried all the other stuff and it doesn't work? and I am not going to keep messing with it just tell me what I need to do to get the replacement part?

It might help a whole lot if you posted a screenshot as he requested...

I have developed the same issue as the original poster. I have my T-Rudder Pedals plugged into my Gladiator Pro. They were working just fine but then suddenly stopped being recognized by anything. This was without making any config changes. I tried updating the Gladiator Pro to V1.817 and VKB Device Config to 0.78.99 without success. I have recalibrated the Gladiator Pro via Wizzo v.83. Nothing I do will get the pedals to be recognized when plugged into the Gladiator Pro. Did this run of Glad Pros have a bad Pedal Connector or controller chip? Any help would be appreciated.

thanks,

Kevin Verdon

Mars is necessary to check the connection with the controller. To do this, we can use some of the hidden features of the configurator. Adding line Test Misc Enabled = 1 in the [Common] section and User = Developer section in [User] zconfig.ini file, and then we will have an additional tab in the Misc Test.
When connected pedals, push the green triangle Mars and should glow green squares, in front of the line, which are connected Mars. In my case it 3,4,5 axis. You is unusual and should be a 7-axis (indicated by the red arrow).
Show a screenshot. After that, we will move on.

I made the requested zconfig changes and here is the screenshot from VKB Device Config.

Could you connect and check the pedals in to Tinybox or Blackbox?

I connected the pedals to my original Tiny Box and they work correctly. They just do not work when plugged into Gladiator Pro.

Static electricity may damage the port. Check the grounding of the computer. For pedals in Gladiator are reserved 3 ports.
To change the port, you need to make another ethernet cable. If you have the ability, I will send the pinout.
P.S. Could you take a picture of the PCB T-Link, which is installed in the pedals?

I believe the computer is properly grounded. The Gladiator Pro is connected to a powered USB Hub. It has been using this hub since I received the glad Pro.

I do have the ability to custom make a Ethernet cable so please provide a pin out. I will work on getting you a shot of the Pedal PCB board.

Thanks for your help,

Kevin

I`ve tried to use t=rudder pedals with Gladiator. 1.817 firmware - T-rudder not recognized. 1.82 - everything is OK. Try! Download address http://forum.vkb-sim.pro/viewtopic.php?f=15&t=908

Sorry, that link goes to a website in Russian that does not appear to have a download link. Does anyone happen to have a download link to the 1.82 Firmware for the Gladiator Pro?

When I check the place I usually download the firmware for, the latest is 1.817

I used the page that Victorus linked and had Google Chrome auto-translate it and found the 1.82 firmware (within the v1_82_0.rar file) . For ease of use, I linked the Gladiator firmware directy to my Dropbox here:
https://www.dropbox.com/s/zjvpxgfr5fur5 ... 0.vkb?dl=0

Please let us know if that works for you.