Need Help in connecting CH Fighterstick to NJoy32Pro

[Lynx]

Hi team VKB.
I need to connect CH Fighterstick handle on Njoy32Pro controller.

From the CH stick I have 9 wires and I found:

1 wire for the common ground (green)

1 wire for the trigger
1 wire for the pinky button
1 wire for the bomb
1 wire for the side button

now I have 4 wires left, each wire activates a 4 way switch (one is POV) but if I move them they replicate the button signals.

I make an example:
If I connect the wire of the pov, once i move it, it gives me the same signal for button 1 when is up, signal 2 when down, 3 right, 4left, 1+3 up right ecc ecc but not a separate signal.

Is this issue a problem of a wrong VKB controlled setting or is something that has to do with the wirings of the stick?

At the moment buttons are connected on IDC-10F of Njoy controller.

I found online a guy that sais that it is possible without soldering new wires on the stick but it is in russian and I don't undertand it.
http://avia-sim.ru/forum/viewtopic.php? ... &start=285

Can you help me to find out what to do?

[Alex Oz]

Show please photos of the plate with comment which wires you are connected.

[Lynx]

Hi Alex Oz,

Thanks for reply.

This is picture.

CH&Njoy

Let me know what I'm doing wrong.

Ciao

[Alex Oz]

Hi,

Handle CH have more then 9 wires - you use it (may be connected to another controller) ?
Or it's disconnected?

Also you need to use another green wire - as common.

[Lynx]

Actually I have only 9 wires.

I dont have other controllers connected.

This is the wiring diagram from CH:

[Alex Oz]

Ok, it seems as matrix connection.

See http://alex-oz.strana.de//Njoy32_matrix.jpg
Connect Columns as 1-4 inputs (buttons 1-4 in your picture).

And need activate matrix in controller:

1-st Register of matrix is as usual phisycal:

and four virtual register of matrix (2-5) begin from register #6 (Base=6) :

[Lynx]

Ok, I will try and let you know!
Thanks for patience and dedication!

[Lynx]

Hi Alex.
I can not activate the Matrix... why?

[Alex Oz]

Oh, sorry...
Need to upgrade user level in zconfig.ini in section [User] :

[User]
...
User=Ace

-----------
or =Developer for highest level

[Lynx]

I dont have USER

this is what I have:

[Skins]
Active=1
Current Skin=Black Box (internal)
Use only skin color=0
[Common]
Auto Read Parameters=1
Autoconnect=0
Reconnect=1
X_POS=884
Y_POS=137
F10_X_POS=25
F10_Y_POS=25
F13_X_POS=25
F13_Y_POS=25
Expert Mode=1
Auto Read Macro=0
Test Button Color=0
Active Tab0=0
Active Tab1=0
Tab Global=1
Tab Profile=1
Tab Axes=0
Tab Axes Logical=1
Tab Buttons=0
Tab ExtDev=0
Tab External=1
Njoy32 preactivation=1
Njoy32 activation on demand=0
Splash Screen=0
Release_DI=1

[Alex Oz]

Copy, paste & save

[Юрий]

Copy, paste & save

User=Developer paste and save in file: zconfig.ini

[Lynx]

I have done it but is not like your picture

[Alex Oz]

With section [User] :


[User]
User=Developer

[Lynx]

yes this is my .ini:

[Skins]
Active=1
Current Skin=Black Box (internal)
Use only skin color=0
[Common]
Auto Read Parameters=1
Autoconnect=0
Reconnect=1
X_POS=149
Y_POS=13
F10_X_POS=25
F10_Y_POS=25
F13_X_POS=25
F13_Y_POS=25
Expert Mode=1
Auto Read Macro=0
Test Button Color=0
Active Tab0=0
Active Tab1=0
Tab Global=1
Tab Profile=1
Tab Axes=0
Tab Axes Logical=1
Tab Buttons=1
Tab ExtDev=0
Tab External=0
Njoy32 preactivation=1
Njoy32 activation on demand=0
Splash Screen=0
Release_DI=1
[User]
User=Developer