Mk.18-3 Rudder Pedals
Moderator: AdminGroup
- JG4_Karaya
- Posts: 7
- Joined: Fri Nov 06, 2015 21:25
- Contact:
Mk.18-3 Rudder Pedals
Just recently bought & received a set of Mk.18-3 rudder pedals with toe brakes and was wondering if there is any documentation & software available online for use with them.
- JG4_Karaya
- Posts: 7
- Joined: Fri Nov 06, 2015 21:25
- Contact:
Re: Mk.18-3 Rudder Pedals
Sry, double post
Last edited by JG4_Karaya on Sun Nov 08, 2015 4:06, edited 1 time in total.
- JG4_Karaya
- Posts: 7
- Joined: Fri Nov 06, 2015 21:25
- Contact:
Re: Mk.18-3 Rudder Pedals
Here are some pictures
In the device manager they are called "VKB Rudder MK19-3 #1129"
In the device manager they are called "VKB Rudder MK19-3 #1129"
Re: Mk.18-3 Rudder Pedals
In the device manager they are called "VKB Rudder MK19-3 #1129"
Yes, this version is Mk19, you can make calibration only by software " dxtweak2".
I can recommend you to use Tinybox. Tinybox supports Mk 19 pedals.
Pedals Mk19 connects to Tinybox by standard ethernet cable, Tinybox is based on Njoy32 platform. You can use configuration tool VKBDevcfg and can adjust filtering, precision, deadzones, curves and etc.
Re: Mk.18-3 Rudder Pedals
Some additional info. I have the same pedals and use them with TinyBox controller. This is a simple version of Njoy32. "Simple" means that you can use three axes only, not buttons. But you can setup response curves, calibrate axis using configuration utility VKBDevCfg.exe and so on.
But now we are awaiting for a BOMB! http://forum.il2sturmovik.ru/topic/3572-vkb-t-link-virtualnye-tormoza-dlya-t-rudder/
Using buttons of another joystick of VKB or even NOT of VKB you will control axes of you pedals with TinyBox! So if you have only single axis pedals, you will have virtual axes for gear brakes, for example. Or/and you can trim rudder axis from joystick.
So I together with Daisy recommend TinyBox!
But now we are awaiting for a BOMB! http://forum.il2sturmovik.ru/topic/3572-vkb-t-link-virtualnye-tormoza-dlya-t-rudder/
Using buttons of another joystick of VKB or even NOT of VKB you will control axes of you pedals with TinyBox! So if you have only single axis pedals, you will have virtual axes for gear brakes, for example. Or/and you can trim rudder axis from joystick.
So I together with Daisy recommend TinyBox!
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
- JG4_Karaya
- Posts: 7
- Joined: Fri Nov 06, 2015 21:25
- Contact:
Re: Mk.18-3 Rudder Pedals
I've already used dxtweak2 for good effect. I was surprised that when I was looking at the game controller window even at full rudder deflection it would only go up to about 70% on both sides. I had to do a fair bit of recalibration for all axis to get them to work as intended. Will have to look where to get the TinyBox from because the European store does not list it seperately.
Re: Mk.18-3 Rudder Pedals
You can contact our European representative to ask about Tinybox. it can be sold separately if there is still stock. If no, it's available to buy directly from us. Thanks
Who is online
Users browsing this forum: No registered users and 52 guests