Hello. I just got my SCG-OTA Left Premium delivered today for Star Citizen. The game was not recognizing the stick correctly so I opened VKB Device Config. The software either identifies the SCG-OTA L as either a (Gladiator NXT or a VKB Boot NJoy32 platform v00.56 Lite). The software also says the firmware version is very old. So I clicked on the boot loader and attempted to flash the firmware version to _Gladiator_SCG_L_v2_09_0. The boot loader says no! wrong version!
Please advise on how I can get this working correctly.
Best Regards,
Jonas Grumby
Hello from California / NXT SCG-OTA-L firmware problem
Moderator: AdminGroup
-
JonasGrumby
- Posts: 1
- Joined: Wed Feb 23, 2022 6:38
-
fallout9
- Posts: 5468
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 222 times
- Been thanked: 1271 times
Re: Hello from California / NXT SCG-OTA-L firmware problem
Hey Jonas, don't worry at this time about reflashing a new firmware, just follow these steps:
Launch VKBDevCfg and click the Default button under Tools tab;
Navigate to Global/Devices/External Devices and press the Find&AutoConfig button;
Go to Test/Axes1 tab and click on the Start Calibr button;
Move your pitch, roll and yaw axes all the way, slowly at the end;
Move the mini-throttle up and down;
Press the A1 ministick center button and when the LED turns red move the ministick all over;
Press the End Calibr button.
Launch VKBDevCfg and click the Default button under Tools tab;
Navigate to Global/Devices/External Devices and press the Find&AutoConfig button;
Go to Test/Axes1 tab and click on the Start Calibr button;
Move your pitch, roll and yaw axes all the way, slowly at the end;
Move the mini-throttle up and down;
Press the A1 ministick center button and when the LED turns red move the ministick all over;
Press the End Calibr button.
Who is online
Users browsing this forum: No registered users and 29 guests