Gunfighter MkIII MCE Ultimate has loose movement to the right before springs engage.

Moderator: AdminGroup

zeroready
Posts: 1
Joined: Mon Oct 25, 2021 3:31

Gunfighter MkIII MCE Ultimate has loose movement to the right before springs engage.

Postby zeroready » Mon Oct 25, 2021 3:32

I have the long extension. Using 50+40 springs. It feels like about 1/4 inch of movement to the right is happening with no spring tension, then I can feel the springs engage. The other 3 directions feel tight, under spring tension right away. It's only going to the right. It's registering the movement in axis binding.

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Gunfighter MkIII MCE Ultimate has loose movement to the right before springs engage.

Postby fallout9 » Tue Oct 26, 2021 10:15

Hard to believe this would happen; if there was an issue it should be on the whole axis, not only on half - both springs and cam are affecting the whole axis the same. Easy to check with the tester, just run it and see if the slider moves along with the grip movement.
You could also open up the base and see if everything it tightened up and running smoothly.


Return to “Technical Support”

Who is online

Users browsing this forum: Delta and 19 guests