I've replaced both of my mini-sticks with hats (see photo).
The top hat works fine for all 5 buttons.
The left hat (Gate Cont) only triggers the centre push button. Left/right/up/down triggers no buttons.
When I look at the axis test screen, the grip is sending axis signals even though its a hat switch and there are no longer any mini-sticks installed.
I have switched both hats to isolate the problem and both hats work in the top position, neither hat works in the left(gate-cont) position. Therefore unfortunately the problem is with the grip or controller
VKBDevCfg: 0.91.89
Firmware: _BlackBox_MK2_GF_MCG_Ultimate_v2_04_4
Things I've already tried:
-switching the hats
-Re-flashed firmware
-Default settings
-Re-calibrated
-Tightening screws
-Enabling/disabling POVs
Photo of hats installed: https://www.dropbox.com/s/hsejzq30bfaml2o/Hats.jpg?dl=0
Video showing the problem here: https://www.dropbox.com/s/bmiq4kh6bzaid ... g.mp4?dl=0
Is there a way we can force the software to know that a hat is installed and not look for a mini-stick?
Or can I get a firmware fix that forces it to use hat buttons instead of mini-stick?
