Hello everyone, i bought and use the gladiator K since July/August 2020 and i have this issue since then. It's not a big deal at all and i can do with it, however i would want to know if it's normal or i'm doing something wrong.
Here is the first image
As you can see, everything seems right, there is a few small changes but i guess it's totally normal and it doesn't affect me.
However, if i put my stick a little bit behind physically (on the pitch axis Y), there is a problem :
Axis Y can move quite a bit, and i don't think it has anything to do with stick calibration since it's exactly the same when i push it in real life, the stick (the Y axis only) doesn't go to the center very precisely and there is a small area where i can release the stick and the stick will no move to the center (i don't know how to explain it, sorry if it's confusing).
That's why i'm asking if it's something normal ? Or if i did something wrong during the fitting of the stick with the base, it's not a big deal but it can be annoying when i release my stick and have to trim everytime to get it right
Gladiator K pitch axis "deadzone" ?
Moderator: AdminGroup
- fallout9
- Posts: 5250
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 209 times
- Been thanked: 1230 times
- fallout9
- Posts: 5250
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 209 times
- Been thanked: 1230 times
Re: Gladiator K pitch axis "deadzone" ?
The Gladiator K is usually running with a deadzone of 5, yours is 1, so too low. Start increasing the DzLo by 0.5, pressing the Set button and testing again in tester afterwards until pleased with results.
Re: Gladiator K pitch axis "deadzone" ?
Thank you both for your help, indeed i don't have the "small axis jumps" now with a deadzone of 5 on both axis. However the problem is about the physical stick, it's not really a deadzone issue but i didn't know how to say it; when i move the stick (in real life), there is a small area where the stick won't come back to it's place (on the Y axis), it can be "too far" from the basic position of the stick thus adding a constant ~1000 difference without me touching the stick, like on the second image of my first post. I can add a deadzone to fix it, however if i do so, i lose some "center sensitivity", a little bit like a hotas x.
I don't think it has anything to do with the stick sensors since it works perfectly, it's just about the placement of the stick i'm not sure if it's something normal or if i didn't put correctly the stick on, even if i followed everything correctly like on the video.
I don't think it has anything to do with the stick sensors since it works perfectly, it's just about the placement of the stick i'm not sure if it's something normal or if i didn't put correctly the stick on, even if i followed everything correctly like on the video.
- fallout9
- Posts: 5250
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 209 times
- Been thanked: 1230 times
Re: Gladiator K pitch axis "deadzone" ?
You are right, the sensors are fine, they're as precise as the ones in the GunFighter system. But the GunFighter system is all metal with different cams and various springs to adjust the return to center. There's no such option in the original Gladiator base; it's still better than any other brand plastic gimbal on the market, but it won't get as precise as the GunFighter system or Gladiator NXT. And that's because the plastic gimbal won't allow stronger springs and without stronger springs you can't have the same precision on returning to center like a metal gimbal confers.
So what I recommend is go with a deadzone of 2 in game and see if the ship is drifting (don't look at the numbers in tester, even if that shows the stick is not centered the game won't consider it). Increase the deadzone as necessary until your ship stops drifting. You could test to see if you're happy with center sensitivity; alternatively you could decrease the deadzone back to 1 and set up a button to cut off the pitch and roll axes (set them to 0 even if they're not on 0) and press that whenever you feel like taking our hand off the stick.
So what I recommend is go with a deadzone of 2 in game and see if the ship is drifting (don't look at the numbers in tester, even if that shows the stick is not centered the game won't consider it). Increase the deadzone as necessary until your ship stops drifting. You could test to see if you're happy with center sensitivity; alternatively you could decrease the deadzone back to 1 and set up a button to cut off the pitch and roll axes (set them to 0 even if they're not on 0) and press that whenever you feel like taking our hand off the stick.
Re: Gladiator K pitch axis "deadzone" ?
Ok thanks ! I'll look into it, atleast i am reassured that it is normal and i didn't break anything
-
- Posts: 60
- Joined: Sat Feb 22, 2020 15:12
- Has thanked: 29 times
- Been thanked: 4 times
Re: Gladiator K pitch axis "deadzone" ?
I think the new Gimbal System in Gladiator NXT gets rid of this Issue. The Bridge, where the Pivot moves inside, has been removed.
Sensor is now directly attached to the Y-Axis, like in Gunfighter. Also Structure is now way more stable - therefore also less bending.
I have re-greased my Gladiator MK. II completly. And adjusted some smaller things. Deadzone of 0, little Finger lightly touched on
Joystick Head - registered by Sensors.
Sorry for bad English!
Sensor is now directly attached to the Y-Axis, like in Gunfighter. Also Structure is now way more stable - therefore also less bending.
I have re-greased my Gladiator MK. II completly. And adjusted some smaller things. Deadzone of 0, little Finger lightly touched on
Joystick Head - registered by Sensors.
Sorry for bad English!
Who is online
Users browsing this forum: Bing [Bot] and 45 guests