Hello everyone, today i received my VKB Vintage Fat Black Mamba Limited Edition and after changing cams and springs and mounting the warthog adapter to the stick i couldn't get any button to work. The sensors for pitch and roll are working as well as all the buttons on the base itself, switches and rotaries. If i mount the stick that came with the base the buttons of that stick work so it's not the cable running trough the central axis of the base. I'm beginning to think that the adapter is faulty.
I'm running VKB device configurator v0.77.23 with njoy32 v1.79+. The firmware on the base is v1.793 PRO.
For the configuration i have:
Global - Commom - #but: 48
External - SPI #1: S-But - RegN:6
And for the profile i tried with the physical layer and the logic layer but it just doesn't recognize any button. In the test area i see the 48 buttons but anything outside the ones on the base are just not working.
I also run VKB Joy tester and the same happens, axis+base buttons work but the ones on the warthog dont.
Any idea on what might be happening?
Thanks.
Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Moderator: AdminGroup
Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Last edited by ghm on Sat Jun 04, 2016 21:33, edited 1 time in total.
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
How to install Warthog Adapter on Vintage Mamba viewtopic.php?f=27&t=2178
Do you connected the cable to "warthog" connector?
Do you connected the cable to "warthog" connector?
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Hi UIV, i connected everything correctly, i took it apart twice to double check it. I also did everything i could find in this support thread, form loading a couple different warthog profiles to tweaking settings in the configurator utility, but i've had no luck yet. The grip buttons just don't want to work.
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
I'm using these two profiles, VKB NJoy32 PRO Default is for the gunfighter grip wich works just fine and FM_Mk3_W_v1_75_A is a profile i downloaded from here for the warthog even though my firmware version is 1.793 PRO instead of 1.75A . I'm uploading a zip file with these two profiles and my config.ini.
- Attachments
-
- Profiles.zip
- (3.03 KiB) Downloaded 289 times
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Please show screenshots of VKBDevCfg.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Problem solved, i have no idea why but after i rebooted my pc everything started working as it should.
Thanks for the help.
Thanks for the help.
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Hello, I have the same problem. Adapter installed, plugged in, wires all good and no buttons work at all. I've since rebooted the PC but it still doesn't work. Please help!
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
I have the same issue with my new Vintage Mamba and the Warthog adapter. Installed the adapter, plugged it in correctly, wires are ok, loaded the Warthog profile but none of the buttons work.
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
kutyafal wrote:I have the same issue with my new Vintage Mamba and the Warthog adapter. Installed the adapter, plugged it in correctly, wires are ok, loaded the Warthog profile but none of the buttons work.
Upload here your profile, please.
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
I'm using the profile VKB created for the Warthog. Downloaded it from VKB site in the following file: VM_v1_79_3.zip
I haven't altered or made any changes. Simply loaded it and pressed "Set" to write config to device. So I'm not sure what other profile file you want since this file comes directly from you, VKB.
Nevertheless I've attached the config file I'm using.
I haven't altered or made any changes. Simply loaded it and pressed "Set" to write config to device. So I'm not sure what other profile file you want since this file comes directly from you, VKB.
Nevertheless I've attached the config file I'm using.
- Attachments
-
- VM_W_1_79_3.zip
- (1.13 KiB) Downloaded 279 times
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
kutyafal wrote:I'm using the profile VKB created for the Warthog. Downloaded it from VKB site in the following file: VM_v1_79_3.zip
I haven't altered or made any changes. Simply loaded it and pressed "Set" to write config to device. So I'm not sure what other profile file you want since this file comes directly from you, VKB.
Nevertheless I've attached the config file I'm using.
I'm having the exact same issue.
Intel i7 4710HQ | 16GB DDR3 | nVidia GTX970M | 1TB Samsung 850 Evo
-----------------------------------------------------------------------------------
• VKB Vintage Black Mamba Mk.III
• Thrustmaster Warthog
• Saitek Combat Rudder Pedals
-----------------------------------------------------------------------------------
• VKB Vintage Black Mamba Mk.III
• Thrustmaster Warthog
• Saitek Combat Rudder Pedals
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Just in case it got missed, did you disconnect the wire on the inside of the base with the 5-pin connector and move it over to the connector on the other side?
(See http://forum.vkb-sim.pro/viewtopic.php?f=27&t=2178, and the two pictures under 'Part 2')
That was the one step I had forgotten when I'd connected my Warthog grip.
(See http://forum.vkb-sim.pro/viewtopic.php?f=27&t=2178, and the two pictures under 'Part 2')
That was the one step I had forgotten when I'd connected my Warthog grip.
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Silh wrote:Just in case it got missed, did you disconnect the wire on the inside of the base with the 5-pin connector and move it over to the connector on the other side?
(See http://forum.vkb-sim.pro/viewtopic.php?f=27&t=2178, and the two pictures under 'Part 2')
That was the one step I had forgotten when I'd connected my Warthog grip.
I'm ashamed to admit that was indeed my issue... I don't know how I missed that step!
Intel i7 4710HQ | 16GB DDR3 | nVidia GTX970M | 1TB Samsung 850 Evo
-----------------------------------------------------------------------------------
• VKB Vintage Black Mamba Mk.III
• Thrustmaster Warthog
• Saitek Combat Rudder Pedals
-----------------------------------------------------------------------------------
• VKB Vintage Black Mamba Mk.III
• Thrustmaster Warthog
• Saitek Combat Rudder Pedals
Re: Warthog stick on VKB Vintage Fat Black Mamba Limited Edition not working.
Thanks for clarifying that. I also missed that step.
Who is online
Users browsing this forum: No registered users and 50 guests