Search found 3272 matches
- Sat Sep 05, 2020 12:23
- Forum: Technical Support
- Topic: Phantom button presses with my MCG grip
- Replies: 18
- Views: 9501
Re: Phantom button presses with my MCG grip
Have you tried the extreme software?
- Thu Sep 03, 2020 18:11
- Forum: Информация
- Topic: GLADIATOR NXT от ВКБ. Начальный уровень? НЕ ВЕРЮ.
- Replies: 43
- Views: 37719
Re: GLADIATOR NXT от ВКБ. Начальный уровень? НЕ ВЕРЮ.
Так они уже есть - это ось твиста на ручках MCG, SCG, F-14.
- Thu Sep 03, 2020 12:41
- Forum: Technical Support
- Topic: Phantom button presses with my MCG grip
- Replies: 18
- Views: 9501
Re: Phantom button presses with my MCG grip
We need Profile-Buttons and Global-Common. Try the extreme firmware and configurator.
- Thu Sep 03, 2020 10:18
- Forum: Technical Support
- Topic: Phantom button presses with my MCG grip
- Replies: 18
- Views: 9501
Re: Phantom button presses with my MCG grip
It is rather strange that the virtual keyboard keys are triggered if it is not activated at all. Show the Global tab and Profile-Buttons.
You can try using the latest firmware and configurator from here.
You can try using the latest firmware and configurator from here.
- Wed Sep 02, 2020 22:23
- Forum: Technical Support
- Topic: Help mcg pro,the trigger is stuck
- Replies: 8
- Views: 2397
Re: Help mcg pro,the trigger is stuck
Email either the seller or warranty@vkb-sim.pro for a replacement spring request. Unfortunately, it happens.
- Wed Sep 02, 2020 22:01
- Forum: Technical Support
- Topic: Help mcg pro,the trigger is stuck
- Replies: 8
- Views: 2397
Re: Help mcg pro,the trigger is stuck
It is necessary to lift the board above the protrusion 1 and then pull it in the direction of the arrow from the connector 2.
When it comes out of the connector a little, then a cutout will appear and things will go easier.
When it comes out of the connector a little, then a cutout will appear and things will go easier.
- Wed Sep 02, 2020 21:44
- Forum: Программное обеспечение
- Topic: Настройки MCG.
- Replies: 114
- Views: 141561
Re: Настройки MCG.
С версии NG v1.99F и конфигуратора v 091.43 поменялась логика настройки осевых триммеров (от осей). Разберем на примере MCG pro и подключенных T-Rudder (7я ось). Задача - относительными осями верхнего стика будем триммировать ось тангажа (2я ось) и ось руля направления педалей (7я ось). Первым делом...
- Wed Sep 02, 2020 19:49
- Forum: Technical Support
- Topic: Help mcg pro,the trigger is stuck
- Replies: 8
- Views: 2397
Re: Help mcg pro,the trigger is stuck
Disconnect the 2pin plug and unscrew the small self-tapping screw. Carefully take out the board and gain access to the plastic retainer. After removing the board, unscrew the self-tapping screw, remove the white plastic spring. And having unscrewed another self-tapping screw, we remove the trigger b...
- Wed Sep 02, 2020 17:24
- Forum: Technical Support
- Topic: Help mcg pro,the trigger is stuck
- Replies: 8
- Views: 2397
Re: Help mcg pro,the trigger is stuck
Carefully disassemble, along the way taking a photo for yourself, so that during assembly there are no questions and no extra parts and screws remain.
- Wed Sep 02, 2020 0:29
- Forum: Technical Support
- Topic: Missing plastic dome on GF mk 3
- Replies: 4
- Views: 1761
Re: Missing plastic dome on GF mk 3
You can also close it, if it's important. Made from heat shrink, cut out a circle, made a tight hole and formed a lid in the spherical plane with his finger.
- Tue Sep 01, 2020 21:15
- Forum: Информация
- Topic: GLADIATOR NXT от ВКБ. Начальный уровень? НЕ ВЕРЮ.
- Replies: 43
- Views: 37719
Re: GLADIATOR NXT от ВКБ. Начальный уровень? НЕ ВЕРЮ.
Никаких щелчков (детендов) в этом Руде нет. Это ось и на ней можно назначить кнопку включения форсажа в конце хода (зона настраиваемая). Думаю, и индикацию этого режима тоже можно настроить.
- Tue Sep 01, 2020 20:45
- Forum: Technical Support
- Topic: Help: VKB-Sim Gladiator MK2 Pro Comm Error
- Replies: 25
- Views: 8283
Re: Help: VKB-Sim Gladiator MK2 Pro Comm Error
Write either to the seller or to warranty@vkb-sim.pro for a request to replace the board in the grip.
- Tue Sep 01, 2020 20:35
- Forum: Technical Support
- Topic: Multidevice NG firmware...
- Replies: 23
- Views: 7966
Re: Multidevice NG firmware...
Reduce it further - from 10,000 to 8,000 and from 13,000 to 10,000. Show the Profile-Axes and Povs tab. Thank.
- Tue Sep 01, 2020 11:02
- Forum: Technical Support
- Topic: Help: VKB-Sim Gladiator MK2 Pro Comm Error
- Replies: 25
- Views: 8283
Re: Help: VKB-Sim Gladiator MK2 Pro Comm Error
I would like to clarify this question - how many volts on the signal wire relative to black?
- Tue Sep 01, 2020 10:37
- Forum: Technical Support
- Topic: Multidevice NG firmware...
- Replies: 23
- Views: 7966
Re: Multidevice NG firmware...
Let's try one more option. Let's change the Spandef coefficients for the microstick axes.
For the 3,4 axis, set 10000 (default 13000) and for the 5,6 axis 13000 (default 20000), press Set, calibrate these axes.
We show the screenshot.
For the 3,4 axis, set 10000 (default 13000) and for the 5,6 axis 13000 (default 20000), press Set, calibrate these axes.
We show the screenshot.