VKB-SIM

I'm sorry, but there are no plans to make a right hand STECS. The right hand Gladiator OTA is the only alternative to a right hand throttle.

Try another USB port and other USB cable (a printer cable, if you have one around).
Are there any lights on the base?

The ministick has to be calibrated, so here's the procedure for resetting and calibrating the joystick: Run VKBDevCfg, select the device at the top, click the Default button under the Tools tab, then click Yes to the configure popup and No to the calibrate popup. Click the Start Calibr button, move ...

Run VKBDevCfg, select the device at the top, click the Default button under the Tools tab, then click Yes to the configure popup and No to the calibrate popup. Click the Start Calibr button, move the joystick along pitch and roll, twist it, click the center push button of the ministick and when the ...

It doesn't make sense to pay for something you won't use, so STECS Standard, UCM and STECS Mini Plus plate are making more sense in your case. You'll have to swap the STEM with the ATEM on the throttle and mount the STEM horizontally on the UCM. You will only need the USB-C to USB-C cable to connect...

Can't bind the button in game because it's a 'silent' button, which works only at logical level. I suggest to use a boolean to connect that button with a physical button, which would be discoverable in game. If you managed to program a button to swap axes I imagine you'll be able to get through the ...

Already responded on Discord; let's stick to one place please in order to avoid confusion.

Pull out the grip and check the 3 wires. Be careful while taking out the grip and mounting it back . Check on the 3 wires. If you still don't see any damage open up the grip and pull the cable up and down through the twist module to make sure there's no damage along the wires (don't pull the wires c...

E:D will recognize only the first 32 buttons on a device and yours having more than that it's just ignoring buttons 33 and higher. In order to overcome that you'll have to split the device into 2 virtual controllers through VKBDevCfg: - select the STECS at the top section of VKBDevCfg, navigate to t...

Here you go.

Open up and check on the cable connecting the grip to the base, make sure it's properly plugged in and not damaged.

You have to plug them to a PC, so you could reset them to default and calibrate. The information is stored internally, so afterwards you can use them on the Mac.

Click again the Default button, then make sure you click Yes at the popup asking to configure. Calibrate afterwards.

2 things:

1. doesn't make any sense to flash new devices; you only need to reset them to default and calibrate them;
2. that is the wrong firmware which works only on the older model of Gladiator; you need the firmware labeled EVO for the latest Gladiators.

That's not right, please send an email to the vendor about it.