Search found 3273 matches
- Mon Nov 30, 2020 12:34
- Forum: Manuals and Howtos
- Topic: Flip Trigger as Axis
- Replies: 7
- Views: 3281
Re: Flip Trigger as Axis
What is flip? What more specifically do you want to get?
- Mon Nov 30, 2020 12:30
- Forum: По заказам
- Topic: Заказ №18307
- Replies: 9
- Views: 8783
- Mon Nov 30, 2020 12:25
- Forum: General discussions
- Topic: Gladiator MkII - Possible to set POV as axis?
- Replies: 1
- Views: 1092
- Thu Nov 26, 2020 17:10
- Forum: Тех. поддержка
- Topic: vkb gunfighter kosmosima глючит контроллер
- Replies: 5
- Views: 2647
Re: vkb gunfighter kosmosima глючит контроллер
посмотрите личку
- Tue Nov 24, 2020 16:05
- Forum: Technical Support
- Topic: Gunfighter shutting off during use
- Replies: 3
- Views: 1385
Re: Gunfighter shutting off during use
There are several options. Contact disappears at the junction points of the base stock-extension or extension-grip. Or the loop connector in the connector comes off inside. Try installing the grip without an extension cord and test it. Check inside the base if the cable is pulled at the extreme posi...
- Tue Nov 24, 2020 15:55
- Forum: VKB FSC Europe
- Topic: Gladiator MkIII Pro and SCG Grip
- Replies: 8
- Views: 3256
Re: Gladiator MkIII Pro and SCG Grip
He may have a Gladiator Pro. You just need to find out which version of the stock. To do this, you need a photo of the base with the grip removed. And according to the result, order the corresponding SCG handle (simple or Premium, left or right).
- Fri Nov 20, 2020 13:17
- Forum: Technical Support
- Topic: configuring new control
- Replies: 46
- Views: 13958
Re: configuring new control
Selecting the wrong cell for setting the axes.
Control axes need to be configured in the cells just above, which are labeled as Aileron Axis, Elevator Axis, Rudder Axis.
Yours need to be removed so that they don't mix.
Control axes need to be configured in the cells just above, which are labeled as Aileron Axis, Elevator Axis, Rudder Axis.
Yours need to be removed so that they don't mix.
- Sun Nov 15, 2020 17:07
- Forum: Technical Support
- Topic: Gladiator NXT VKBDevCfg error: GET NXT ACTIVE CFG - FAILED
- Replies: 5
- Views: 2467
Re: Gladiator NXT VKBDevCfg error: GET NXT ACTIVE CFG - FAILED
And if you add the line User=Developer to the [User] section of the zconfig.ini file located in the configurator folder?
- Sun Nov 15, 2020 11:22
- Forum: Technical Support
- Topic: Gladiator NXT VKBDevCfg error: GET NXT ACTIVE CFG - FAILED
- Replies: 5
- Views: 2467
Re: Gladiator NXT VKBDevCfg error: GET NXT ACTIVE CFG - FAILED
After loading the profile, do you press the Set button?
- Fri Nov 13, 2020 20:32
- Forum: Technical Support
- Topic: Gunfighter mk3 w/ 200mm extension is losing connection
- Replies: 42
- Views: 21592
Re: Gunfighter mk3 w/ 200mm extension is losing connection
You need to get out the rubber plugs and then push the board out. You may need to remove the conductors from the connector.
- Thu Nov 12, 2020 11:27
- Forum: Technical Support
- Topic: Cam wear after a week or two
- Replies: 44
- Views: 29174
Re: Cam wear after a week or two
These are not wear and tear, but traces of processing after manufacturing.
After galvanizing, the surface is treated to eliminate unevenness. Don't worry, it's okay.
After galvanizing, the surface is treated to eliminate unevenness. Don't worry, it's okay.
- Mon Nov 09, 2020 11:39
- Forum: Technical Support
- Topic: MCG Pro Twist Mk2 + T-Rudder pedals missing axis
- Replies: 5
- Views: 2018
Re: MCG Pro Twist Mk2 + T-Rudder pedals missing axis
And the top HAT stopped working due to incorrect setting of these values? :) . Be careful in the settings, here every number must be correct. And it is these values that must be duplicated in the POVs settings - then everything will work correctly. There should not be any additional Generic devices....
- Sat Nov 07, 2020 16:06
- Forum: Technical Support
- Topic: Gunfighter x and y axis go to sleep
- Replies: 3
- Views: 1427
Re: Gunfighter x and y axis go to sleep
When the axes disappear, do the leds on BB start blinking? Which USB port does the BB plug into - black (2.0) or blue (3.0, 3.1)?
- Sat Nov 07, 2020 16:04
- Forum: General discussions
- Topic: MCG Pro (w/twist adaptor) yaw problem
- Replies: 8
- Views: 3108
Re: MCG Pro (w/twist adaptor) yaw problem
What is your BB - black or orange? When the axes disappear, do the leds on BB start blinking?
Which USB port does the BB plug into - black (2.0) or blue (3.0, 3.1)?
If you leave only one GF in the system or try to connect on another machine (laptop) - the problem remains?
Which USB port does the BB plug into - black (2.0) or blue (3.0, 3.1)?
If you leave only one GF in the system or try to connect on another machine (laptop) - the problem remains?
- Fri Nov 06, 2020 10:20
- Forum: Technical Support
- Topic: Gladiator Mk II primary fire button replacement
- Replies: 7
- Views: 2617
Re: Gladiator Mk II primary fire button replacement
To test the button operation, you need to activate the Poll checkbox in the Profile-Buttons tab. And after that, conclusions can be drawn about the next steps.
If things are really bad - write to warranty@vkb-sim.pro - pay only for delivery.
If things are really bad - write to warranty@vkb-sim.pro - pay only for delivery.