Search found 5185 matches
- Tue Oct 10, 2023 10:37
- Forum: Technical Support
- Topic: Cannot update firmware on new BB MK3 (GFIV) device
- Replies: 12
- Views: 1421
Re: Cannot update firmware on new BB MK3 (GFIV) device
That doesn't look like MKIII, flash the MKII firmware please.
- Tue Oct 10, 2023 10:36
- Forum: Technical Support
- Topic: Kosmosima/Gunfighter 3 grip connection issue.
- Replies: 36
- Views: 7542
Re: Kosmosima/Gunfighter 3 grip connection issue.
Post some pics please with the connectors of the new parts plugged, so we could see if the wires are in the right order.
- Sun Oct 08, 2023 12:59
- Forum: Technical Support
- Topic: STECS Devcfg number of buttons
- Replies: 6
- Views: 8660
Re: STECS Devcfg number of buttons
The number in brackets in the header is the minimum of firmware version recommended to be used in combination with that version of VKBDevCfg. You should get the USB PID feature active on both joysticks; try to flash the second one to the latest fm too. If that doesn't help try to swap USB ports or k...
- Sun Oct 08, 2023 7:42
- Forum: Technical Support
- Topic: STECS Devcfg number of buttons
- Replies: 6
- Views: 8660
Re: STECS Devcfg number of buttons
It displays 99 instead of 128 because you've been playing with it ) Either set it to 128 or reset to default, reinitialize and calibrate it.
The USB PID feature is MCG grip related, not needed for STECS, so it's loaded only when a MCG is detected.
The USB PID feature is MCG grip related, not needed for STECS, so it's loaded only when a MCG is detected.
- Sat Oct 07, 2023 5:24
- Forum: Technical Support
- Topic: STECS: Use Without Detent Frame
- Replies: 2
- Views: 2071
Re: STECS: Use Without Detent Frame
No issue to use it with no frame at all.
- Sat Oct 07, 2023 5:21
- Forum: VKB FSC Europe
- Topic: Next rudder batch?
- Replies: 2
- Views: 2054
Re: Next rudder batch?
MKIV is gone. MKV will arrive together with the STECS at the end of this month or early next month.
- Thu Oct 05, 2023 23:30
- Forum: Technical Support
- Topic: Failed USB HID Controller
- Replies: 1
- Views: 275
Re: Failed USB HID Controller
They don't get fried so easily. Stick to the service ticket, you'll get instructions how to get it out of bootloader mode.
- Wed Oct 04, 2023 5:24
- Forum: Technical Support
- Topic: Joystick not recognized anymore/Communication Error
- Replies: 1
- Views: 313
Re: Joystick not recognized anymore/Communication Error
First of all unplug from USB, then release the fastener, reseat the grip on the base (make sure it's all the way in), tighten the fastener really good so the grip won't get disconnected and plug back to USB. Run VKBDevCfg, select the device at the top, click Default button. After it restarts click Y...
- Wed Oct 04, 2023 1:31
- Forum: Manuals and Howtos
- Topic: Gunfighter 4 dampener screws
- Replies: 6
- Views: 2327
Re: Gunfighter 4 dampener screws
The single #20 spring per cam, which is the default setup, is certainly pretty weak and it's more like a holder rather than a recommended setup. I suggest trying a double #30 springs setup on each cam. This is the guide you'd need. I suggest not to swap the cams, only springs for now. Of course, if ...
- Wed Oct 04, 2023 0:27
- Forum: General discussions
- Topic: STECS Modules (ATEM and STEM) Can Be Used On Their Own?
- Replies: 23
- Views: 4206
Re: STECS Modules (ATEM and STEM) Can Be Used On Their Own?
Only the STEM could be used in combination with other NXT modules, but not by itself.
- Wed Oct 04, 2023 0:26
- Forum: Manuals and Howtos
- Topic: Gunfighter 4 dampener screws
- Replies: 6
- Views: 2327
Re: Gunfighter 4 dampener screws
Well, 'tight' is relative, depending on end user; for someone who comes from a TM style joystick, with that large spring pushing the grip from all sides, it might appear tight.
- Wed Oct 04, 2023 0:20
- Forum: Technical Support
- Topic: Cannot update firmware on new BB MK3 (GFIV) device
- Replies: 12
- Views: 1421
Re: Cannot update firmware on new BB MK3 (GFIV) device
I need to know if that's really a MKIII bb, please check the back of it. If not sure, post pics.
- Tue Oct 03, 2023 8:57
- Forum: Technical Support
- Topic: Cannot update firmware on new BB MK3 (GFIV) device
- Replies: 12
- Views: 1421
Re: Cannot update firmware on new BB MK3 (GFIV) device
There's no attachment. Are you sure you have a MKIII Black Box?
- Tue Oct 03, 2023 7:12
- Forum: Manuals and Howtos
- Topic: Gunfighter 4 dampener screws
- Replies: 6
- Views: 2327
Re: Gunfighter 4 dampener screws
Counter-clockwise would release the dampeners' screws. When the screws are becoming really wiggly don't go any further.
- Mon Oct 02, 2023 7:12
- Forum: Technical Support
- Topic: Best cam selection for prop driven olanes.
- Replies: 3
- Views: 568
Re: Best cam selection for prop driven olanes.
Your post is perfectly fine, it's just that this forum is used only for technical issues; not much of a community to discuss and advise. Try our Discord server, more like it that you'll get some opinions over there.