Search found 313 matches
- Wed Jan 17, 2018 3:50
- Forum: Technical Support
- Topic: Calibration after flashing v1.91F
- Replies: 33
- Views: 19908
Re: Calibration after flashing v1.91F
Click default, then click set(important) , THEN calibrate. Gotta do that because the device isn't "ready" until you do. When you click end calibr, the device restarts and you should be ok. I can't replicate it as it only happened after the flash and it's gone now. But you're not crazy! I s...
- Tue Jan 16, 2018 22:15
- Forum: Technical Support
- Topic: Calibration after flashing v1.91F
- Replies: 33
- Views: 19908
Re: Calibration after flashing v1.91F
FWIW I had that happen too. Hitting the "set" button cleared it.
- Sun Jan 14, 2018 21:10
- Forum: Technical Support
- Topic: Continued Macro Ticks Changing
- Replies: 10
- Views: 16744
Continued Macro Ticks Changing
OK so I've waded into the macro tab and figured some things out that IMO aren't all that obvious and have had success in making some macros for commands in a game (Aces High) that aren't able to be mapped to a simple button command. I'd made a simple one first that allowed me to exit flight, [/.ef]....
- Sun Jan 07, 2018 3:22
- Forum: Technical Support
- Topic: Making a macro
- Replies: 6
- Views: 4362
Re: Making a macro
Thanks guys. I'm starting to pick it up. I was looking for something like a single dialog box I could type the whole thing into but I see in this software it's really a series of single dialog boxes per keystroke that are either chained together or not depending on the length of the command. I've al...
- Sat Jan 06, 2018 19:19
- Forum: Technical Support
- Topic: Making a macro
- Replies: 6
- Views: 4362
Re: Making a macro
Won't let me register to that forum without a game key. Anyone HERE able to help?
- Fri Jan 05, 2018 20:43
- Forum: Technical Support
- Topic: Making a macro
- Replies: 6
- Views: 4362
Re: Making a macro
Translated but won't let me see pics and gifs.
- Fri Jan 05, 2018 20:20
- Forum: Technical Support
- Topic: Making a macro
- Replies: 6
- Views: 4362
Making a macro
All righty I have my GF Mk1/MCG-Pro up and running. Was able to flash the new firmware and now everything is working as expected. It's super smooth and I haven't even started tweaking it yet! Anyway, I'm fiddling with devconfig trying to figure out how to make a macro or at least one as I understand...
- Fri Jan 05, 2018 1:46
- Forum: Technical Support
- Topic: Help! Cam rubbing against screw
- Replies: 4
- Views: 3638
Re: Help! Cam rubbing against screw
Looks like you have 2 spacers (washers) behind the cam on the inner side. It's not lining up by about that much if I had to guess. Move one of them to the outer side of the cam behind the screw head and see if that doesn't line it back up. Disclaimer! I haven't taken mine apart yet. Just looking at ...
- Wed Jan 03, 2018 20:30
- Forum: Technical Support
- Topic: MCG Pro - mapping ministick and brake axes
- Replies: 28
- Views: 18944
Re: MCG Pro - mapping ministick and brake axes
Yeah it was a relief actually when the stick light went from red flashing to green. At that point I had a feeling these things weren't all speaking the same language. Good to know it's just a software glitch. You'll straighten it out. Thanks for getting back to us.
- Wed Jan 03, 2018 7:44
- Forum: Technical Support
- Topic: MCG Pro - mapping ministick and brake axes
- Replies: 28
- Views: 18944
Re: Flashing red BB Stick LED w/ MCG-Pro grip
Cool! That at least got the stick light to green. I'm still seeing the small red LED on the PCB so now I'm guessing this is normal. I'm with you then. Chipping away at the next steps. Thanks much!
- Wed Jan 03, 2018 7:17
- Forum: Technical Support
- Topic: MCG Pro - mapping ministick and brake axes
- Replies: 28
- Views: 18944
Flashing red BB Stick LED w/ MCG-Pro grip
Well the long wait was over today and I've been messing with trying to set up the stick and I'm running into a problem with devcfg not seeing the MCG grip. It sees the gunfighter base but shows a KG-12 grip connected to it (which I never had). Changing it to the MCG in devcfg has no effect as it sho...
- Sun Dec 17, 2017 18:41
- Forum: Technical Support
- Topic: C-Clip cut loose? Where does it go ? (Gladiator MkII)
- Replies: 6
- Views: 4090
Re: C-Clip cut loose? Where does it go ? (Gladiator MkII)
When a pin has a C-Clip holding parts onto it there's usually a groove cut into it where the clip is intended to be. Usually it's near the end. Look for the groove. That's where it'll go.
- Thu Oct 05, 2017 20:48
- Forum: VKB FSC Europe
- Topic: Gunfighter Pro help required
- Replies: 11
- Views: 9766
Re: Gunfighter Pro help required
First post here. Andy, I would say definitely DO NOT use super glue on those threads! Especially if you ever might want to or need to take that assembly apart! If you use super glue, once it's cured, it's stuck forever. If you had to take it apart for whatever reason it'd be with a dremel tool and a...