VKB-SIM

1. Yes. 2. Only Mars (3pin) or resistor. It is possible to work with halls (from 3.3 volts the lower limit), but to set the correct magnet for it may not work right away. Therefore, nerves are more expensive. Try writing to sales@vkb-sim.pro about the acquisition of Mars. 3.You have only one 7th axi...

Например, на Али. Или ждать когда появятся в российском магазине.

Your mistake in assigning to the 8 button all the other combinations. And she is busy with Shift. You need to choose not used in the layout (after the 32nd) and everything will work out. Video.

Try writing to sales@vkb-sim.pro with an explanation of what you need.

Judging by the photo, she is whole, not broken. So? Explain in more detail your failure.

It is not clear what kind of buttons (button) we are talking about. Or do you need a plastic "fungus" HAT? As an example, such.

Личку глянь.

Show in the photo what specific button you are talking about.

After flashing, all axes should be calibrated. The pedals are configured on the 7th axis by default. Show a screenshot of the Profile-Axes tab after calibration.

Допишите строчки в файл zconfig.ini как на картинке, чтобы появилась вкладка External-Leds. И потом её показать.

Покажите скриншоты вкладок Global-External-Leds, Profile-Buttons, Profile-Axes-A2B.

Most likely, the rule of conformity of the version of the configurator and firmware is violated. In the header of the configurator, the recommended firmware is indicated in brackets. You can use versions above, below - it is not recommended. Check and adjust.

Yes, absolutely right.

Leave those that default.

41st was selected as an example, you can use the buttons starting from the 34th. Because up to 33 (inclusive) we are already using.