VKB-SIM

No modules could get attached to the sides of the STECS the way the Gladiator NXT allows. The only way to get modules attached to the STECS is by MFH.

The restock for Gunfighters and grips is in May; not sure about exact date at this moment.

They are included in the UCM sets.

Won't fit in vertical position on UCM, too bulky for that. You'll need a dedicated mount.

Unfortunately the phone holder will just keep your screen in place, but it will not secure it firmly in place. I suggest finding a special table support on Amazon and DIY it to get attached to the UCM. The brackets are soft metal and it's easy to drill (it might not even be the case, if you'll use t...

The money are getting back into your account within 48 hours after receiving the parcel. Depending on the banks involved, it might take few more days for the money to show up.

With a bit of DIY it is possible, but you'll lose access to all buttons, as they will sit in the palm of your hand if you turn it around.

No need to phone, the procedure implies opening a service ticket with your vendor.

I'm sorry, but there are no plans to make a right hand STECS. The right hand Gladiator OTA is the only alternative to a right hand throttle.

Try another USB port and other USB cable (a printer cable, if you have one around).
Are there any lights on the base?

The ministick has to be calibrated, so here's the procedure for resetting and calibrating the joystick: Run VKBDevCfg, select the device at the top, click the Default button under the Tools tab, then click Yes to the configure popup and No to the calibrate popup. Click the Start Calibr button, move ...

Run VKBDevCfg, select the device at the top, click the Default button under the Tools tab, then click Yes to the configure popup and No to the calibrate popup. Click the Start Calibr button, move the joystick along pitch and roll, twist it, click the center push button of the ministick and when the ...

It doesn't make sense to pay for something you won't use, so STECS Standard, UCM and STECS Mini Plus plate are making more sense in your case. You'll have to swap the STEM with the ATEM on the throttle and mount the STEM horizontally on the UCM. You will only need the USB-C to USB-C cable to connect...

Can't bind the button in game because it's a 'silent' button, which works only at logical level. I suggest to use a boolean to connect that button with a physical button, which would be discoverable in game. If you managed to program a button to swap axes I imagine you'll be able to get through the ...

Already responded on Discord; let's stick to one place please in order to avoid confusion.