VKB-SIM

Thanks for the update.

Any electronic device might get damaged if it's under permanent vibrations; now it depends how hard it's vibrating and other factors, but probably you'll be fine. I suggest though to put a sheet of rubber between the throttle and mount plate, to act like a buffer.
Nice setup btw

Fully release the dampeners and make sure the gimbal is moving freely https://youtu.be/HRC5uPpFPzk

Please download the attached file, then extract it in the same folder with zBootloader. Run zBootloader as Admin, make sure the BBIII is in bootloading mode (disconnect other devices to make sure), then erase everything from the command line and type in: load . Try to flash the Unified firmware afte...

The ETA for the MCGU is mid to end of May. Please mention in the order notes that you need it with RevB connector.

With the BB in the same stage as in your screenshot above (bootloading mode, with blue light and OK for Boot Device) clear the command line (where the firmware name is) and type: save . Check the folder where zbootloader is stored, zip the .op1 file you'll find in there and attach it to a message he...

If you've been charged once for VAT surely you won't get charged a second time, just keep the invoice handy for delivery as proof.

Trying to include the GFII too, but can't confirm at this time, sorry.

Visit our Discord server about it, more focus on SC over there.

Firmware version 2.16.5 is the latest stable. If you want to try beta firmware check here. Be advised that you'll have to match the firmware with software for compatibility.

A chair with a cutout would definitely help, or even one with a narrow seat.

That might indicate a poor connection to PC. Connecting directly to the back of computer or using a reliable USB powered hub is recommended.

The attaching base screws pattern is definitely different, but you could just drill new holes. Here's the pattern:

To elaborate, axis #9 on the Profile/Axes panel has to get the same settings as axes #7 and #8 on the Em, Vs, Cn, Precis, DzLo and DzHi on the Logical axes panel and on the ACn, ACl, Filter, Thrs, HF and MPL checkboxes on the Physical Axes Layer. After these changes you have to press Set to save the...

Definitely a charging cable won't work, but a data USB C to USB C should work. Of course, there are many manufacturers of such cables and the quality varies, so I can't guarantee that