Search found 5224 matches
- Thu May 23, 2024 20:37
- Forum: Technical Support
- Topic: how often calibrate the device
- Replies: 3
- Views: 185
Re: how often calibrate the device
There's a monitor for grip to base connection on the Test/External Devices panel of VKBDevCfg. Click the grip icon and let the window running. If you see large red blocks when you move the grip around there's something wrong with the way the grip is mounted - either not seating properly on the base ...
- Thu May 23, 2024 20:31
- Forum: Technical Support
- Topic: VKB SEM Corrupted?
- Replies: 1
- Views: 39
Re: VKB SEM Corrupted?
How are they connected? Post a pic please with the internal connection between the SEM and Gladiator.
- Thu May 23, 2024 20:29
- Forum: Technical Support
- Topic: SEM issue
- Replies: 5
- Views: 127
Re: SEM issue
Here. Just keep in mind that you'll have to match the firmware with the version of VKBDevCfg you're running (the firmware compatibility is indicated in VKBDevCfg's top bar).
- Mon May 20, 2024 21:03
- Forum: General discussions
- Topic: I am an idiot - need help!
- Replies: 3
- Views: 141
Re: I am an idiot - need help!
That's right, that unit will have to stay on the desk.
Show us a pic with your setup, OP, so we can see if you can integrate the 2 modules into the UCM; for example, if you have 2 UCMs you can get a module on each, so you won't need the MFH anymore.
Show us a pic with your setup, OP, so we can see if you can integrate the 2 modules into the UCM; for example, if you have 2 UCMs you can get a module on each, so you won't need the MFH anymore.
- Mon May 20, 2024 20:58
- Forum: Technical Support
- Topic: how often calibrate the device
- Replies: 3
- Views: 185
Re: how often calibrate the device
Please post a screenshot of Profile/Axes/Logical and Physical Axes chart.
- Mon May 20, 2024 9:35
- Forum: Technical Support
- Topic: STECS Thumbwheel Axis Issue
- Replies: 3
- Views: 141
Re: STECS Thumbwheel Axis Issue
This is a completely unrelated issue, most probably an uncalibrated device.
- Mon May 20, 2024 9:33
- Forum: General discussions
- Topic: I am an idiot - need help!
- Replies: 3
- Views: 141
Re: I am an idiot - need help!
So, if you want to run the SEM and FSM as an independent unit you'll need the following: - SEM, FSM-GA, MFH (you already got these); - JST to USB C cable ; - GNX HID Controller . You'll install the GNX HID Controller into the SEM, connect the SEM to the FSM by the JST to USB C cable (JST to SEM, USB...
- Sat May 18, 2024 20:06
- Forum: VKB FSC Europe
- Topic: when is support typically available?
- Replies: 2
- Views: 115
Re: when is support typically available?
Contacting the vendor by email or from the contact page on their website is the way.
- Fri May 17, 2024 21:10
- Forum: Technical Support
- Topic: STECS Thumbwheel Axis Issue
- Replies: 3
- Views: 141
Re: STECS Thumbwheel Axis Issue
If the throttle is properly calibrated and the axis still acts like that please fill up a service ticket.
- Fri May 17, 2024 11:02
- Forum: Technical Support
- Topic: NXT Evo does not connect when FSM-GA is connected to GNX-SEM, but connects when FSM-GA is connected to GNX-THQ
- Replies: 4
- Views: 146
Re: NXT Evo does not connect when FSM-GA is connected to GNX-SEM, but connects when FSM-GA is connected to GNX-THQ
Please update to the latest software and firmware, then reset to default and click Yes for the config button. If still not working afterwards fill up a service ticket with your local vendor.
- Tue May 14, 2024 10:41
- Forum: Technical Support
- Topic: Device Descriptor Request Failed
- Replies: 1
- Views: 88
Re: Device Descriptor Request Failed
I think we already responded to this on the tickets; if not, please fill up a ticket with the issue.
- Tue May 14, 2024 10:40
- Forum: Technical Support
- Topic: SEM issue
- Replies: 5
- Views: 127
Re: SEM issue
Maybe the cable is bad, do you have another cable to try?
Also try swapping USB ports too.
Also try swapping USB ports too.
- Tue May 14, 2024 10:32
- Forum: Technical Support
- Topic: NXT Evo does not connect when FSM-GA is connected to GNX-SEM, but connects when FSM-GA is connected to GNX-THQ
- Replies: 4
- Views: 146
Re: NXT Evo does not connect when FSM-GA is connected to GNX-SEM, but connects when FSM-GA is connected to GNX-THQ
Can you post a pic with your setup please?
- Tue May 14, 2024 10:30
- Forum: Technical Support
- Topic: Missing detents for STECS in VKBDevConfig
- Replies: 1
- Views: 56
Re: Missing detents for STECS in VKBDevConfig
Just close and run again VKBDevCfg, that should fix it.
- Fri May 10, 2024 21:15
- Forum: Technical Support
- Topic: SOLVED: STECs spamming multiple control presses in MSFS 2020
- Replies: 2
- Views: 144
Re: SOLVED: STECs spamming multiple control presses in MSFS 2020
Thanks for the update.