Search found 11 matches
- Tue Jan 23, 2018 1:27
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
Enclosed is a image and the washer in question, thanks for your help.
- Sun Jan 21, 2018 7:46
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
They are working now. I don't understand anything either, bit of a language barrier here. Do you have a assembly diagram for the pedals, I just want to make sure I put everything back in the right order. I have a big washer left over.
- Sun Jan 21, 2018 4:43
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
Its working again, I have no idea why other than I ran the very latest software did the button thing and screen shot. Then I checked the axes and the pot was working. So this thing was bricked up and now its not. I put the pedals back and ended up with a larger washer, does that go on the potentiome...
- Sun Jan 21, 2018 0:44
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
Ok here is what I came up with did I do it right?
- Fri Jan 19, 2018 1:33
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
This is my last attempt. There is no movement registered when I turn the pot. Can I send this in for repair?
- Fri Jan 12, 2018 23:39
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
I will give that a shot ASAP. I bought some saitek pedals so I can continue flying at least.
- Fri Jan 12, 2018 2:28
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
This is where I am at. I am stuck I think the tiny box controller is ok but the actual pot and magnet and electronics Untitled_1.png I just want to use my pedals. I think the problem lies here can I get the electrionic board on this photo.? Asking a customer to go through all these hoops is not cust...
- Wed Jan 10, 2018 17:22
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
Hello any movement on this? How can I make a warranty claim and get this repaired?
- Sat Jan 06, 2018 7:59
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
Thank you.
Only the green LED is lit, the yellow lights for a second if you disconnect and reconnect the USB cable or click on restart. Nothing changes if you disconnect or reconnect the RDR link cable.
Only the green LED is lit, the yellow lights for a second if you disconnect and reconnect the USB cable or click on restart. Nothing changes if you disconnect or reconnect the RDR link cable.
- Sat Jan 06, 2018 2:11
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
Re: T-Rudder Mark III
I loaded the latest driver. The rudder shows centered but no amount of pedal movement has an effect. I removed all the linkage and just connected the cable the board and spin the pot and nothing registers. Are the electronics bad? This should still be under warranty VKB, please assist. Where can I s...
- Fri Jan 05, 2018 6:21
- Forum: Technical Support
- Topic: T-Rudder Mark III
- Replies: 20
- Views: 10571
T-Rudder Mark III
T-Rudder Mark III
1.67F Firmware
stock springs
stock cam
Hello my pedals have stopped working. They only show a value full right rudder in any software or game (no amount of pedal movement makes any difference)
They are fine mechanically, please assist,
Thank you
1.67F Firmware
stock springs
stock cam
Hello my pedals have stopped working. They only show a value full right rudder in any software or game (no amount of pedal movement makes any difference)
They are fine mechanically, please assist,
Thank you