Search found 9 matches
- Sat Feb 24, 2018 6:55
- Forum: Technical Support
- Topic: MCG loose base
- Replies: 45
- Views: 39839
Re: MCG loose base
I had to buy a new screw driver for that one as well. It resides quite deep.
- Fri Feb 09, 2018 21:18
- Forum: Technical Support
- Topic: Had to open MCG to tighten loose screws
- Replies: 11
- Views: 7460
Re: Had to open MCG to tighten loose screws
UIV from VKB recommends using DIN127 M3 split washer. Yes, we should not have to do that with a brand new stick. I have to go buy a new Philip head screw driver to open the grip because my existing screw driver are too shot to reach one of the screw. And too prevent it from coming loose again, I hav...
- Thu Feb 08, 2018 23:32
- Forum: Technical Support
- Topic: MCG loose base
- Replies: 45
- Views: 39839
Re: MCG loose base
Will loctite those two screws affect the possibility to install the twist adaptor in the future?
I imagine Loctite the stick screws may also possible to 'screw' your chance of getting the stick fixed in the future in case of loose wire etc.
I imagine Loctite the stick screws may also possible to 'screw' your chance of getting the stick fixed in the future in case of loose wire etc.
- Wed Feb 07, 2018 12:34
- Forum: Technical Support
- Topic: Oil on cam and ball bearing
- Replies: 0
- Views: 2795
Oil on cam and ball bearing
I notice some oil was put from the factory on cams and ball bearings of my GF Mk.2 base. Does VKB team recommend putting some oil there, if so what type of oil should I use?
- Wed Feb 07, 2018 12:30
- Forum: Technical Support
- Topic: Had to open MCG to tighten loose screws
- Replies: 11
- Views: 7460
Re: Had to open MCG to tighten loose screws
AG, just an FYI, I had decided to change springs to #30. On re-adjusting the clutches I noticed the wiggle at the base connector was back. I'd only tightened it a week or so ago. Sure enough, it was the same pair of screws that holds the base connector onto the grip. I was reluctant to go crazy tor...
- Wed Feb 07, 2018 12:28
- Forum: Technical Support
- Topic: MCG loose base
- Replies: 45
- Views: 39839
Re: MCG loose base
Got the same issue. Tighten the screws fixed it. I heard a report that the screws may come loose again after a while, can anyone confirm?
- Sun Jan 21, 2018 16:35
- Forum: Technical Support
- Topic: Latest VKBDevCfg-C error
- Replies: 2
- Views: 2495
Re: Latest VKBDevCfg-C error
I've tested and can verify that it is conflict with Tobii Eyetracking 4C USB device. Temporarily unplug Tobii device solved the issue.
- Fri Jan 19, 2018 23:57
- Forum: Technical Support
- Topic: Latest VKBDevCfg-C error
- Replies: 2
- Views: 2495
Latest VKBDevCfg-C error
The latest VKBDevCfg-C 0.83.96 won't start and will give error "Abnormal program termination". Going back to older version (0.83.88) works fine. Run on Windows 10 x64 latest Fall Creator Update.
- Fri Jan 19, 2018 22:38
- Forum: Technical Support
- Topic: Latest Firmware & Software
- Replies: 8
- Views: 6788
Re: Latest Firmware & Software
Okay fair point Here is the link: http://ftp.vkb-sim.pro/Firmware/Gladiator/Gl_v1_85_B.zip Talking 3rd party file exchange, of course people do it when they exchange custom-made profiles or whatever they make themselves for their own use and for sharing with friends. However we can only be responsi...