Search found 268 matches

by AeroGator
Wed Feb 21, 2018 7:15
Forum: Technical Support
Topic: Loose Button on MCG Pro
Replies: 3
Views: 108

Re: Loose Button on MCG Pro

he said to post in here. If you bought the device directly from us - write to us (email) quoting the order number. Order number still missing. However, please write to warranty@vkb-sim.pro with a brief description of the problem (no pictures needed), PLUS the order number . It is necessary to descr...
by AeroGator
Tue Feb 20, 2018 5:02
Forum: Technical Support
Topic: Loose Button on MCG Pro
Replies: 3
Views: 108

Re: Loose Button on MCG Pro

Please open a ticket at the shop where you bought the device.
We will talk to the shop.
If you bought the device directly from us (VKB Headquarter) - write to us (email) quoting the order number.
This will help.
by AeroGator
Mon Feb 19, 2018 4:32
Forum: Technical Support
Topic: Driver error
Replies: 1
Views: 43

Re: Driver error

I have gladiator mk2 and have set it up properly so that it has worked just fine for me for a few months. However lately I have been experiencing hardware issues which cause my pc to hard reboot often, and most times when my pc starts back up it is very difficult to get the vkb joystick to power on...
by AeroGator
Mon Feb 19, 2018 4:24
Forum: General discussions
Topic: Cancellation of MCG/Pro for Gladiator Pro?
Replies: 1
Views: 101

Re: Cancellation of MCG/Pro for Gladiator Pro?

Hi, I'd just like to get some official clarification on the plans for the MCG/Pro grip for the original Gladiator Pro ? Are the MCG/Pro grip compatibility still being worked on for the 5-pin bases, or has this been officially cancelled? If it has been cancelled, is there any way for us on the pre-o...
by AeroGator
Sat Feb 17, 2018 15:10
Forum: Technical Support
Topic: Gladiator Pro MKII + MCG Pro Firmware
Replies: 4
Views: 90

Re: Gladiator Pro MKII + MCG Pro Firmware

I'm not sure what Film maker and lighting have anything to do with Joystick controller :roll: Damn. I copied a wrong link, and didn't check it before posting. A shot too many. I meant this of course http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762 . :lol: So please have a look at it, and writ...
by AeroGator
Fri Feb 16, 2018 9:56
Forum: Technical Support
Topic: Gladiator Pro MKII + MCG Pro Firmware
Replies: 4
Views: 90

Re: Gladiator Pro MKII + MCG Pro Firmware

1 - Device model and version: Gladiator Pro MKII + MCG Pro (Alpha version) 2 - Controller Firmware version: _Gladiator_VKB_v1_85_B Nice beginning but dropped half way. Please re-read this post: http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762 - I believe you had read it already, but please re...
by AeroGator
Fri Feb 16, 2018 9:50
Forum: VKB FSC Europe
Topic: VKB Gladiator mk II , HELP: annoying noise
Replies: 8
Views: 286

Re: VKB Gladiator mk II , HELP: annoying noise

I' m considering to ship back to VKB the item for a replacement Shipping anything back without previous agreement is waste of time and funds, as the parcel will be automatically returned to sender. Whatever replacements or fixings can only be made after talking to the shop where you had bought the ...
by AeroGator
Wed Feb 14, 2018 4:59
Forum: Technical Support
Topic: Gladiator MKII mode button not working.
Replies: 12
Views: 455

Re: Gladiator MKII mode button not working.

RJ971 wrote:When I press the mode button........

Please read this post http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762 and follow the directions.
by AeroGator
Tue Feb 13, 2018 12:16
Forum: Technical Support
Topic: New stick, wiring fault
Replies: 4
Views: 190

Re: New stick, wiring fault

Hope that explains it. OK, then pls do not use any glue or soldering; let it be as it is. These connectors are made to last, and so they do if properly fixed. Yours might have been a bit loose at assembly, then further shaken out of place during shipment. And keep me posted if anything. _IF_ howeve...
by AeroGator
Mon Feb 12, 2018 15:36
Forum: Technical Support
Topic: Wire has cut inside the Gunfighter base
Replies: 20
Views: 334

Re: Wire has cut inside the Gunfighter base

Ace wrote:I'm not a native english speaker :)

Neither am I. :)
I am sending you a PM within a few mins. Please check.
by AeroGator
Mon Feb 12, 2018 13:52
Forum: Technical Support
Topic: Wire has cut inside the Gunfighter base
Replies: 20
Views: 334

Re: Wire has cut inside the Gunfighter base

(a bunch of pictures) Please Sir, I am trying to help. >>> It would help to compose the picture so that the parts in question take 90 per cent of the picture, not 20 <<< Let's see this: Gimbal1.jpg total image size: 1024x768 relevant image size: 398x399 relevant image relative size: 20.19% wasted s...
by AeroGator
Mon Feb 12, 2018 9:50
Forum: Technical Support
Topic: Wire has cut inside the Gunfighter base
Replies: 20
Views: 334

Re: Wire has cut inside the Gunfighter base

Ok, Same as me. Then a batch issue.. Two random occurrences make up a batch issue? Wow. Spike issue on the roll axis............I'm trying to make a contact with VKB HQ now. Let us not pile up different things. Spikes are one, wires another. "Subsequently doesn't mean consequently". And l...
by AeroGator
Mon Feb 12, 2018 7:20
Forum: Technical Support
Topic: New stick, wiring fault
Replies: 4
Views: 190

Re: New stick, wiring fault

One thing i did note upon going through the x axis motion and watching the stretching of the cable was. At the very extreme x movement the connector moves because of a slightly short cable and i think it might cause more problems down the road. As we checked it on our test joystick, the cable even ...
by AeroGator
Sun Feb 11, 2018 12:14
Forum: General discussions
Topic: Questions and Answers
Replies: 116
Views: 12256

Re: Questions and Answers

Thanks for informing us of the timing Thanks for the kind words. In fact we had shipped the container out... but it got jammed at Chinese customs due to pre-CNY Apocalypse in all Chinese ports. So it's as good as unshipped anyway. I don't believe it will be released any time before mid-March. Stock...
by AeroGator
Sun Feb 11, 2018 12:03
Forum: Official announcements
Topic: Twist Adapter ETA?
Replies: 14
Views: 734

Re: Twist Adapter ETA?

A quick update before Chiense New Year waltzes us away from forums 8)
We've more or less finished the molds. Mid-March will see the test samples made. Then everything will depend on how happy we are with what comes out.

Go to advanced search