Search found 325 matches

by AeroGator
Mon Jul 23, 2018 5:52
Forum: Official announcements
Topic: VKB SUMMER VACATIONS 2018
Replies: 0
Views: 52

VKB SUMMER VACATIONS 2018

*** Dear fellow pilots, Due to summer vacations the forum support may become intermittent till late August. Occasional delays may happen. We apologize for possible inconvenience. We will try to stay connected but it's impossible to promise to stay available on daily basis. Hope to see you all again ...
by AeroGator
Mon Jul 23, 2018 3:47
Forum: Technical Support
Topic: Having MCG Pro Issues, random intermittent button presses
Replies: 31
Views: 1735

Re: Having MCG Pro Issues, random intermittent button presses

Before digging for anything else, let us do the connection check. Please remove all the mechanics from the casing, dis- and reconnect the cables - especially the one that goes to/from the grip. Might be some oxidation on one of the pins. A few cycles of disconnection and reconnection usually cure th...
by AeroGator
Mon Jul 16, 2018 6:33
Forum: Technical Support
Topic: Response Curve in DevCfg appllied incorrectly
Replies: 8
Views: 132

Re: Response Curve in DevCfg appllied incorrectly

Sorry for the delay; we will reply in a day or two.
by AeroGator
Fri Jul 13, 2018 15:50
Forum: Technical Support
Topic: T-Rudder MkIV RJ45 Connector
Replies: 2
Views: 64

Re: T-Rudder MkIV RJ45 Connector

We use standard 8-wire ethernet cable, the same that runs between computers and hubs.
So the replacement can probably be found for a dollar or so in the nearest computer repair shop.

Happy flights!
by AeroGator
Tue Jul 03, 2018 13:53
Forum: Technical Support
Topic: Loose In Y Axis
Replies: 16
Views: 323

Re: Loose In Y Axis

The calibration is fine With all respect, I need the Qs answered in teh way they are put. Did you calibrate the device using VKB calibration tools? Y/N If Y, please in a few words describe how you did it. .... Did you loosen the tighter damper on Y? .... please show me the picture like the one I am...
by AeroGator
Tue Jul 03, 2018 9:55
Forum: Technical Support
Topic: Gladiator Pro MKII connection pin stuck causing red flashing led
Replies: 4
Views: 113

Re: Gladiator Pro MKII connection pin stuck causing red flashing led

DKFlight wrote:Shipping it back for a replacement

I hate this happening but thank you for patience. I believe the next one will be good.
by AeroGator
Mon Jul 02, 2018 14:37
Forum: Technical Support
Topic: Gladiator Pro MKII connection pin stuck causing red flashing led
Replies: 4
Views: 113

Re: Gladiator Pro MKII connection pin stuck causing red flashing led

I just received my new stick and was having problems with the flashing red led and no button on the stick being recognized. I found the info on flashing the firmware, used all the tools to check the stick and making sure the stick is properly seated. Then I took a close look and discovered one of t...
by AeroGator
Mon Jul 02, 2018 14:32
Forum: Technical Support
Topic: Upgrade kit
Replies: 1
Views: 79

Re: Upgrade kit

Harryr1668 wrote:Does the upgrade kit also fix the play in the pitch axis on the Gladiator MK1 or does it just facilitate changing grips

Correct.
The slack around the center will be considerably reduced.
by AeroGator
Mon Jul 02, 2018 14:31
Forum: Technical Support
Topic: EU Website not fonctional ?
Replies: 3
Views: 102

Re: EU Website not fonctional ?

ColdCraving wrote:since some days i want to place an order on a MCG but every time i log myself i get white page with just "error"
Any idea ?

Thanks for bringing it to our attention. It was up and running when I visited last, but let me see again. We will give a nudge to European guys in case it isn't.
by AeroGator
Sun Jul 01, 2018 15:32
Forum: Technical Support
Topic: T-Rudder MKIV not working
Replies: 1
Views: 60

Re: T-Rudder MKIV not working

having issues getting my pedals working in DCS Welcome to the forum. Please check this out: http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762 - here are the guidelines to getting tech support fast. Please make yourself familiar with all questions listed there, as well as with the software diag...
by AeroGator
Sun Jul 01, 2018 13:21
Forum: Technical Support
Topic: gunfighter gimbal lag? (Star citizen)
Replies: 4
Views: 139

Re: gunfighter gimbal lag? (Star citizen)

Good it worked out for you. :)
by AeroGator
Fri Jun 29, 2018 10:55
Forum: Technical Support
Topic: Loose In Y Axis
Replies: 16
Views: 323

Re: Loose In Y Axis

a - the dumper on one of the axes is tuned to be stronger than on another (it is OK but not for now). So, to begin with, temporarily loosen the tighter dumper . .... 3 - use VKB calibration tools to re-calibrate the device . ...i reset it just in case. Did you calibrate the device using VKB calibra...
by AeroGator
Fri Jun 29, 2018 8:36
Forum: Technical Support
Topic: Loose In Y Axis
Replies: 16
Views: 323

Re: Loose In Y Axis

The problem persists Sorry the numbers in the attached picture cannot be seen :roll: too small... you did everything right, as I asked you to keep the picture size smaller, but in this case exception can be made! Once again, sorry for wasting you time, but when you have a minute please upload a rea...
by AeroGator
Fri Jun 29, 2018 7:52
Forum: Technical Support
Topic: Loose In Y Axis
Replies: 16
Views: 323

Re: Loose In Y Axis

Wow this is getting more interesting now.
Thanks for more info, we will chew on it.
Back to you later today.

YES it is damper of course. My bad.
by AeroGator
Fri Jun 29, 2018 5:54
Forum: Technical Support
Topic: Loose In Y Axis
Replies: 16
Views: 323

Re: Loose In Y Axis

Heres some more Pics. From the pictures I get a suspicion that a - the dumper on one of the axes is tuned to be stronger than on another (it is OK but not for now). So, to begin with, temporarily loosen the tighter dumper. b - you calibrated the device using Windows tools. Never do that. 1 - go to ...

Go to advanced search