Search found 121 matches

by Andy
Thu Feb 02, 2023 21:01
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Re: Broken VKB GF1 board.

I took this to an electronics repair shop, and they can solder a new connector on, but need to know which way up, and what type the connector is.
I will still need to replace the part that holds the grip.
by Andy
Mon Jan 30, 2023 13:48
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Re: Broken VKB GF1 board.

Going into week 3 of no response. Can i go through vkb usa? I have a business need for my stick. I have money for parts and shipping. I have a friend in usa who is happy to forward on shipping to me in uk. Will be faster than VKB europe i think.
by Andy
Sun Jan 22, 2023 2:02
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Re: Broken VKB GF1 board.

Hi,

I still have not had a response from EU rep. I really need these parts to fix my flight stick. What is the issue?
by Andy
Wed Jan 18, 2023 20:54
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Re: Broken VKB GF1 board.

#9764

thanks
by Andy
Wed Jan 18, 2023 1:02
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Re: Broken VKB GF1 board.

Hi I have made a request, but have had no response. Seems a few other have also tried to contact VKB Europe. Is everything ok? I bought this stick because it is supposed to last. Now I cannot even get replacement parts.
by Andy
Tue Jan 10, 2023 22:37
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Re: Broken VKB GF1 board.

I also noticed the one of the pins has fatigued where the grip extension connects. A couple of images. https://cdn.discordapp.com/attachments/787442623169560606/1062323270399037470/rn_image_picker_lib_temp_04f42e4b-66b9-424d-b410-2fc8056fc9f8.jpg https://cdn.discordapp.com/attachments/78744262316956...
by Andy
Tue Jan 10, 2023 1:25
Forum: VKB FSC Europe
Topic: Broken VKB GF1 board.
Replies: 11
Views: 1908

Broken VKB GF1 board.

Hi, I have had many issues with my GunFighter Mk1 and have regularly had to break it down and service it, my experience of with this stick has been not so good. Most issues I have are to do with phantom inputs, sure people have helped but no permanent fix. I have the issues again, and I took it apar...
by Andy
Tue Jun 29, 2021 22:39
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

[quote="fallout9"]Please ignore the 2.05.5 comments; the issues that user is reporting on Russian forums are Gladiator NXT related.
This seems to have worked. I will come back if problems occur again, else thanks four help :)
by Andy
Tue Jun 29, 2021 0:10
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

Hi again Andy. Please follow this guide to properly calibrating your device. Hi again, I did recalibrate as recommended, however the jitter effected the calibration Helloh! You may also take a Look into this Thread: https://forum.il2sturmovik.ru/topic/970-%D0%BF%D1%80%D0%BE%D0%B3%D1%80%D0%B0%D0%BC%...
by Andy
Sun Jun 20, 2021 14:36
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

Hi, this is happening again. Only on the brake lever this time. It twitches on the axis even when I am not touching the stick at all. I have recalibrated, but was unable to calibrate that axis... Is there anymore firmware that I am unaware of? The version of firmware I have is a higher revision than...
by Andy
Fri Feb 19, 2021 22:40
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

There was not a spring washer on it. What size nut is it? I will have to order some.
by Andy
Fri Feb 19, 2021 22:25
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

Actually I tried something before I read your last post, which was to take the stick apart. I found that the nut holding the roller to the cam was coming loose again, and the roller was running on the rim of the cam. This is an issue that I had before with this stick. Going to have to get some lockt...
by Andy
Fri Feb 19, 2021 22:04
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

Yes, it is jittering as shown in the video I referenced in my post first.
by Andy
Fri Feb 19, 2021 21:56
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

There is still noise on the X Axis.
by Andy
Fri Feb 19, 2021 21:43
Forum: Technical Support
Topic: Phantom inputs
Replies: 31
Views: 12651

Re: Phantom inputs

Capture3.PNG
Capture4.PNG

Go to advanced search