VKB-SIM

Use case was having three different modes on a ministick - pov, mouse and axes.

All versions of the space stecs are in stock. Left mini, left mini plus, left standard, left max, right mini, right mini plus, right standard, and right max. Not sure what you are talking about. Sadly, VKB does not offer right STG replacement grips, despite them working on the left base (albeit with...

I took the Houthi thread to mean "ships are diverted around the Cape of Good Hope, causing delays between half a month and a whole month", rather than "VKB shipments are getting stolen/destroyed". The stuff FSC is getting in stock is from containers that were sent out before spac...

Should be 10, 20, 30. 40 and above are only on gunfighter. Stock springs are 20 on both.

Did you buy one of them open box EVOs that are on sale from the EU store at the moment? That looks like a fairly old model between the 5-pin S-LED connector on the USB board and the lack of rubber rings on the clutch adjustment screws. You probably need a different firmware version, marked as "...

It is fine to gently touch the edges of the range. Just do not push the limits with all your might hoping for a tiny bit of extra range.

Just a quick update, we have discussed this on Discord and it looks as if the Gunfighter base is Mk1, which is Rev.A, not compatible with the Mk2/Mk3 Warthog adapter's Rev.B connector.

Like before, you do not pick the op2 file in the regular file selector, you type "load" (and only load) into the file box while your black box is in bootloader mode. A file selector should open as soon as you type the "d", select the OP2 file in that and it should now accept the ...

No way to hook it up to the base wiring as, for better or worse, VKB sticks use a proprietary bs protocol that is nothing like the Thrustmaster-derived protocol the Moza uses. The most straightforward way is somewhat convoluted if you are coming from Gladiator sticks: VPForce sells an adapter that a...

Please follow Alex's instructions and type "save" in the file box of zbootloader. Just "save", nothing else. Then upload the op1 file that appears in your zbootloader folder. a VKB employee can take a look at that and give you further instructions to fix your issue.

Fixed in 2.19.9 (3) as mentioned in
https://forum.il2sturmovik.ru/topic/970 ... ent-933326
Confirmed on my setup

Might be from that batch that had a null device signature. Those came with the T-Rudders for a while IIRC.

M5

It is easiest to use a second GNX-HID, since that allows you to set both THQs to subaddress 4 if they are on different HID boards.
It is possible though to put the WW2 grip on a THQ with different subaddress. It just takes some effort to disable the additional axis and enable the grip buttons instead

I would definitely recommend a USB hub. Running everything through one device is technically possible, but it requiressome serious hardware hacking and additional parts, while giving you a worse experience than the hub. So if your only goal is cutting down on cables, a hub is the way to go.